Lifters??

Smokedawg · 10-01-2001, 11:33 AM

I changed my setup again. I changed my order from AFR 185's to 205 heads and had to send my tf track heat intake back and ordered the tf-R intake..My question is, do I stay with roller lifters and roller cam or get solid lifters and cam??

The cam will be custom grind.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Smokedawg · 10-01-2001, 06:02 PM

TTT

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Five0 · 10-01-2001, 07:19 PM

If this is going to be driven on the street I would stay with a roller lifter setup but if you want to take full advantage of your set up and don't mind adjusting rockers every once in a while then the solid roller set up will go faster.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
No good times with 347 stroker yet!

10-01-2001, 11:33 AM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Lifters?? I changed my setup again. I changed my order from AFR 185's to 205 heads and had to send my tf track heat intake back and ordered the tf-R intake..My question is, do I stay with roller lifters and roller cam or get solid lifters and cam?? The cam will be custom grind. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hydraulic Roller Lifters - Help Me Decide	NO SLO PK	Windsor Power	5	07-28-2003 04:04 PM
How long do stock lifters last?	Fox Hound	Windsor Power	2	11-22-2002 05:33 PM
checking lifters	oldman86	Windsor Power	0	08-08-2002 01:05 PM
lifters	Lightspeed	Classic Mustangs	2	07-19-2002 01:54 PM
HO cam profile and flat lifters?	OzRuss	Windsor Power	11	05-30-2002 09:18 PM

10-01-2001, 06:02 PM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	TTT ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

10-01-2001, 07:19 PM	#3
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	If this is going to be driven on the street I would stay with a roller lifter setup but if you want to take full advantage of your set up and don't mind adjusting rockers every once in a while then the solid roller set up will go faster. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX No good times with 347 stroker yet!