Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
10-02-2001, 09:01 PM
|
#1 |
|
Procharged!
Join Date: May 1999
Location: Hanover, PA
Posts: 1,539
|
Another thing is they do not have drain pet-cocks so you need to pull the bottom hose to drain the radiator, not a real issue. I suggest getting a electric fan so you don't need to drill mounting holes for the factory shroud. My 16" Perma-cool works great, I have a Stewart H2O pump and a 180 thermo, I can drive with out the fan on most of the time if I am crusing and it may reach 180 degrees, usually runs around 175.
------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! [b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree |
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Davis Terminated! Arnold becomes Gov... | StangFlyer | Blue Oval Lounge | 70 | 10-25-2003 12:06 AM |
| electric fan and radiators | VeNuM | Windsor Power | 2 | 11-12-2002 06:02 PM |
| install on ron davis alum radiator???? | horse with no name | Windsor Power | 1 | 07-11-2001 02:48 PM |
| Aluminum Radiators? Which is the best? | horse with no name | Windsor Power | 12 | 06-21-2001 07:46 PM |
| Hot& Cold..AKA: Plugs,Wires and Radiators | Danbo | Modular Madness | 8 | 12-07-1999 07:20 PM |