© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-23-2006, 09:33 PM | #1 |
Registered Member
Join Date: Jan 2000
Location: Mount Joy, PA , U.S.
Posts: 198
|
Do I need Subframe connectors
Hi I am putting a 8lb blower on my 89 stang. It currently has a performer intake, Blower Cam, full exhaust, and I will also prob be using a 50 Wet Shot of Nos.
I was wondering is it time for subframe connectors and what are the best ones to get. Thanks |
10-23-2006, 10:51 PM | #2 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Do I need Subframe connectors
Subframes are a good idea for even a stock mustang. There are several good companys that make them. Get a set that have the crossbrace for the seats.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
10-23-2006, 11:54 PM | #3 |
fireball
Join Date: Jan 2004
Location: Western Canada
Posts: 6
|
Re: Do I need Subframe connectors
Definitly install subframe connectors and check for cracks behind the front seats on the floor boards. Keep putting the power to it and you might want to consider a roll bar too.
__________________
95 Mustang 8.89 @ 154.8 3200 lbs 302 on the juice |
10-24-2006, 12:05 PM | #4 | |
Rearview Mirror Haze
Join Date: May 1999
Location: Huntsville, Alabama...a.k.a. "HuntsVegas"
Posts: 387
|
Re: Do I need Subframe connectors
Quote:
I hope you're not running 8psi and a 50 shot on the stock bottom end
__________________
93 lx Notch 01 GT ...the epitome of Murphy's Law |
|
10-24-2006, 03:38 PM | #5 | |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: Do I need Subframe connectors
Quote:
Most of the time its a melted piston or blown gasket that ruins your motor. Very rarely is it a split block or broken rod.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
10-24-2006, 09:51 PM | #6 |
Registered Member
Join Date: Jan 2000
Location: Mount Joy, PA , U.S.
Posts: 198
|
Re: Do I need Subframe connectors
which subframe connectors are better the welded ones or bolt on's
|
10-24-2006, 10:04 PM | #7 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Do I need Subframe connectors
Weld in type all the way!! My local welding shop did mine for $20
Where is Mt.Joy PA? Are you near Danville at all?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
10-24-2006, 11:58 PM | #8 | |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
Re: Do I need Subframe connectors
Quote:
Stangs 79-04 all should of had subs welded on as soon as they leave the car lot imo.....full length is the way to go, I have some cheap tubular bolt on's that i had welded, work alright i guess the steeda full length's are nice since they have a torque box reinforcement.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
|
11-06-2006, 07:44 PM | #9 |
Registered Member
Join Date: Jan 2000
Location: Mount Joy, PA , U.S.
Posts: 198
|
Re: Do I need Subframe connectors
82 Gt
I am like 20 min west of Lancaster if you know where that is. Would you happen to know anyone around here that welds these things in. Thanks |
11-06-2006, 09:17 PM | #10 |
95 GTS 5.0
Join Date: Nov 2006
Location: Shreveport LA
Posts: 24
|
Re: Do I need Subframe connectors
Hey Im originally from williamsport pa area. I know where danville is. Man the airforce has me stationed in shreveport la. and that shit whole wants $100-120 for mine to be welded on. damn.
|
11-06-2006, 10:27 PM | #11 | |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Re: Do I need Subframe connectors
Quote:
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vert Subframe Connectors? Help? | xxxBlakexxx | Modular Madness | 3 | 02-08-2004 12:41 AM |
Subframe connectors for a vert! | 93yello1 | Windsor Power | 3 | 05-28-2002 03:34 PM |
Which Subframe Connectors? | 90LxDroptop | Windsor Power | 1 | 01-26-2002 04:27 PM |
A bottom-line questioning topic on subframe connectors. | SlowStang2 | Windsor Power | 3 | 08-15-2001 05:39 PM |
full length or standard length subframe connectors? | 84stangLX | Windsor Power | 4 | 04-23-2001 03:48 PM |