any thoughts on a 393

antyates · 11-14-2006, 11:35 PM

building a 393 trying to get a good combo, intake??? cam??? carb??? i have
69 block eagle forged kit with h- beams and je pistons and i also have afrs 185 like to have alot of low end power range 1500-6500 any suggesions
thanks

Coupe50h · 11-15-2006, 12:35 AM

Depends on tranny, and if you want it streetable, assuming you use a c4 3000 stall area, I would use a victor intake, 750-800 holley dp, The cam would have to be chose carefully if you want drivability, comp cams has something off the shelf, or custom im sure, they could recomend something based off your mods.
Those heads would offer plenty of lowend in my opinion, big for a 302, maybe on the small side for a 393, but of course the 225's are maybe a little too wild.

Dark_5.0 · 11-15-2006, 09:27 AM

With a

TrickFlow R intake manifold/75mm TB
Edelbrock Victor junior heads
custom cam
10 to 1 393 stroker

My brother in law put down nearly 450HP and Torque to the wheels and it was very streetable.

No tuning at all. 30# injectors, C&L meter, untouched A9L etc...

antyates · 11-15-2006, 11:01 AM

I Can Get A Hold Of A Set Of Victor Juinor Heads, Dark 5.0 Can You Get Specs On Your Brothers Cam? And I Have A 5 Speed Tranny, As Far As The Intake What About A Edelbrock Rpm Air Gap, Or The Super Victor,
Thanks Alot

~The Jester~ · 11-15-2006, 02:34 PM

Quote:

Originally Posted by antyates

I Can Get A Hold Of A Set Of Victor Juinor Heads, Dark 5.0 Can You Get Specs On Your Brothers Cam? And I Have A 5 Speed Tranny, As Far As The Intake What About A Edelbrock Rpm Air Gap, Or The Super Victor,
Thanks Alot

T5? Go buy 3rd gear synchros NOW. You're gonna need 'em.

1979bruiser · 11-15-2006, 05:49 PM

i sent you a pm..

11-14-2006, 11:35 PM	#1
antyates Registered Member Join Date: Jun 2006 Posts: 20	any thoughts on a 393 building a 393 trying to get a good combo, intake??? cam??? carb??? i have 69 block eagle forged kit with h- beams and je pistons and i also have afrs 185 like to have alot of low end power range 1500-6500 any suggesions thanks

11-15-2006, 12:35 AM	#2
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: any thoughts on a 393 Depends on tranny, and if you want it streetable, assuming you use a c4 3000 stall area, I would use a victor intake, 750-800 holley dp, The cam would have to be chose carefully if you want drivability, comp cams has something off the shelf, or custom im sure, they could recomend something based off your mods. Those heads would offer plenty of lowend in my opinion, big for a 302, maybe on the small side for a 393, but of course the 225's are maybe a little too wild. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

11-15-2006, 09:27 AM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: any thoughts on a 393 With a TrickFlow R intake manifold/75mm TB Edelbrock Victor junior heads custom cam 10 to 1 393 stroker My brother in law put down nearly 450HP and Torque to the wheels and it was very streetable. No tuning at all. 30# injectors, C&L meter, untouched A9L etc... __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

11-15-2006, 11:01 AM	#4
antyates Registered Member Join Date: Jun 2006 Posts: 20	Re: any thoughts on a 393 I Can Get A Hold Of A Set Of Victor Juinor Heads, Dark 5.0 Can You Get Specs On Your Brothers Cam? And I Have A 5 Speed Tranny, As Far As The Intake What About A Edelbrock Rpm Air Gap, Or The Super Victor, Thanks Alot

11-15-2006, 05:49 PM	#6
1979bruiser Registered Member Join Date: Aug 2006 Location: budds creek md Posts: 100	Re: any thoughts on a 393 i sent you a pm..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Random Thoughts Thread.	mustangman65_79	Blue Oval Lounge	18	10-27-2003 04:31 PM
and now Deep Thoughts, by Jack Handey	fiveohpatrol	Blue Oval Lounge	20	03-07-2002 12:17 PM
Cloning.... Your Thoughts	Coupe Devil	Blue Oval Lounge	11	03-01-2002 04:46 PM
Blower or n/a parts first: your thoughts?	Capri306	Windsor Power	5	06-05-2001 09:17 PM
Painting tips..thoughts and ideas wanted.	Shotgun28	Windsor Power	8	02-15-2001 10:15 PM