Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-22-2007, 05:04 PM
|
#1 |
|
Registered Member
Join Date: Aug 2007
Posts: 10
|
ECT sensor relocation
Has anyone tried relocating the ECT sensor off of the cooling tube to one of the open plugs on the rear of the lower intake?
I want to remove the tubes all together |
|
|
|
08-22-2007, 09:11 PM
|
#2 |
|
Registered Member
Join Date: Mar 2003
Location: Saint Louis, MO
Posts: 634
|
Re: ECT sensor relocation
circulation is not so good back there..........
__________________
Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/ |
|
|
|
|
08-22-2007, 10:24 PM
|
#3 |
|
Registered Member
Join Date: Aug 2007
Posts: 10
|
Re: ECT sensor relocation
My worst case solution is to put a break in the heater hose hith a fitting for the sensor. I'm puting the motor in a 67 and I want to delete egr, canister, air pump and run heater hoses. I want to get rid of the coolant tube as well........just trying to make it look as vintage as possible
|
|
|
|
|
08-23-2007, 10:47 AM
|
#4 |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Re: ECT sensor relocation
If you don't have the tubes, what are you going to connect the heater hoses to?
__________________
|
|
|
|
|
08-23-2007, 10:52 AM
|
#5 | |
|
Registered Member
Join Date: Aug 2007
Posts: 10
|
Re: ECT sensor relocation
Quote:
The water pump and put a nipple fitting on the lower intake where the tube is connected. |
|
|
|
|
|
08-23-2007, 12:20 PM
|
#6 |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Re: ECT sensor relocation
Make sure you put a hose clamp on that nipple, hot water shooting out when your not expecting it would be a bad day. Wouldn't a tube look cleaner than a hose running all the way back to the firewall? IMO anyway.
__________________
|
|
|
|
|
08-24-2007, 01:37 PM
|
#7 | |
|
Registered Member
Join Date: Aug 2007
Posts: 10
|
Re: ECT sensor relocation
Quote:
|
|
|
|
|
|
09-08-2007, 12:44 AM
|
#8 |
|
Registered Member
Join Date: Feb 2002
Location: Arlington, Washington
Posts: 92
|
Re: ECT sensor relocation
I removed my heater and those tubes and got an adapter for the ECT and installed where the heater tube went into the lower intake. I haven't had any problems and you can tie the wires in with the injector wiring to keep it looking clean.
__________________
Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust, |
|
|
|
|
09-08-2007, 07:32 AM
|
#9 |
|
Registered Member
Join Date: Aug 2007
Posts: 10
|
Re: ECT sensor relocation
Thanks dog. Where did you get your heat flow from?
|
|
|
|
|
09-08-2007, 08:03 AM
|
#10 |
|
Registered Member
Join Date: Mar 2003
Location: Saint Louis, MO
Posts: 634
|
Re: ECT sensor relocation
I'd guess he doesn't need heat - socal maybe?
__________________
Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/ |
|
|
|
|
09-10-2007, 10:47 PM
|
#11 |
|
Registered Member
Join Date: Feb 2002
Location: Arlington, Washington
Posts: 92
|
Re: ECT sensor relocation
I took out the heater. I went to replace the heater core a couple of years ago and decided not to put the heater back in when I realized how much useless plastic came out. Actually I live in Washington and only drive the car occassionally now.
__________________
Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust, |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Battery Relocation....Questions | LXinProgress | Windsor Power | 6 | 09-07-2005 03:57 PM |
| Battery relocation. Any bad effects? | Dark_5.0 | Windsor Power | 5 | 01-11-2004 09:06 AM |
| Battery Relocation... | Bad89stang | Windsor Power | 1 | 12-01-2001 12:47 PM |
| Battery relocation tips | 93GT50 | Windsor Power | 4 | 11-12-2001 11:14 PM |
| Battery rear kit relocation | Rocket 99GT | Windsor Power | 5 | 06-02-2001 02:50 PM |