got clutch????????

goodyear1984 · 10-23-2007, 05:56 PM

what clutch are you guys using .....im running slicks and my engine mods are listed below ....running 11 second et with a 1.6 60ft..i have a ram hd but its not liking the abuse ...

Dark_5.0 · 10-23-2007, 08:39 PM

I was having the same problem and after much research I decided on a Spec stage 3 clutch. It holds 680 ft lbs of torque!!!!

goodyear1984 · 10-24-2007, 05:13 PM

what flywheel are u using? and how are u launching it?(rpm and riding it out?)

USMC302 · 10-26-2007, 07:47 AM

I run the Centerforce Dual Friction, I run consistantly in the 11's and have been in the 10's with it as well. I use an aluminum RAM flywheel and launch at 6k with ET Streets. Hasn't failed me yet, but as suggested, I've heard good things about spec clutches.

goodyear1984 · 10-26-2007, 08:12 PM

what about with the stock flywheel...well a new steel flywheel

goodyear1984 · 10-26-2007, 08:13 PM

i have et drags

Dark_5.0 · 11-08-2007, 09:29 PM

I havent got to run mine yet and probably wont get to till spring. I highly reccomend an aftermarket flywheel and a steel bellhousing with the power you are making.

skiwesser · 11-09-2007, 02:44 AM

I run a Spec stage 1, not enough power to overtake it yet, I like the pedal feel too. I did have trouble with clearance between the pressure plate and the stock bellhousing, anyone else run into that with a Spec clutch?

goodyear1984 · 11-20-2007, 06:28 PM

for the price of getting theclutch and flywheel and everything i said screw it am i goin wit a c4 rev man w/brake..i dont know what stall im goin to use ...and im goin to tie the frame and get afr heads...i wont be happy until i get the ft tires off the ground

10-23-2007, 05:56 PM	#1
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	got clutch???????? what clutch are you guys using .....im running slicks and my engine mods are listed below ....running 11 second et with a 1.6 60ft..i have a ram hd but its not liking the abuse ... __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

10-23-2007, 08:39 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: got clutch???????? I was having the same problem and after much research I decided on a Spec stage 3 clutch. It holds 680 ft lbs of torque!!!! __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

10-24-2007, 05:13 PM	#3
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: got clutch???????? what flywheel are u using? and how are u launching it?(rpm and riding it out?) __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

10-26-2007, 07:47 AM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: got clutch???????? I run the Centerforce Dual Friction, I run consistantly in the 11's and have been in the 10's with it as well. I use an aluminum RAM flywheel and launch at 6k with ET Streets. Hasn't failed me yet, but as suggested, I've heard good things about spec clutches. __________________

10-26-2007, 08:12 PM	#5
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: got clutch???????? what about with the stock flywheel...well a new steel flywheel __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

10-26-2007, 08:13 PM	#6
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: got clutch???????? i have et drags __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

11-08-2007, 09:29 PM	#7
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: got clutch???????? I havent got to run mine yet and probably wont get to till spring. I highly reccomend an aftermarket flywheel and a steel bellhousing with the power you are making. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

11-09-2007, 02:44 AM	#8
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Re: got clutch???????? I run a Spec stage 1, not enough power to overtake it yet, I like the pedal feel too. I did have trouble with clearance between the pressure plate and the stock bellhousing, anyone else run into that with a Spec clutch? __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ

11-20-2007, 06:28 PM	#9
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: got clutch???????? for the price of getting theclutch and flywheel and everything i said screw it am i goin wit a c4 rev man w/brake..i dont know what stall im goin to use ...and im goin to tie the frame and get afr heads...i wont be happy until i get the ft tires off the ground __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clutch make sqeeking noise,clutch pedal wobbles	XBAJBUSX	Windsor Power	2	10-20-2004 07:29 AM
clutch has PMS----HELP	AlBob	Small Ponies	0	04-08-2003 08:14 PM
Which clutch to get?	jimmyjamed	Windsor Power	3	05-12-2002 01:56 PM
re clutch	ponyexpress289	Classic Mustangs	1	04-14-2002 10:41 PM
Clutch	Tommy T	Classic Mustangs	1	11-28-2000 01:23 AM