Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
12-10-2007, 01:24 AM
|
#1 |
|
Registered Member
Join Date: May 2007
Posts: 10
|
sticky brakes
I have a 1990 5.0 the brakes sticks just the front I have to manualy lift the brake pedal with my foot to unstick them the front starts to shake from the brakes sticking it stops as soon as I lift the brake pedal any help would be great
__________________
1990 Lx 331 stroker, Holly System max 2, 190lph fuel pump, 30lb injectors,76mm mass air meter calibrated to the 30lb (i think?), long tube headers off-road h-pipe with glasspacks |
|
|
|
12-19-2007, 11:09 AM
|
#2 |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Re: sticky brakes
My first guess would be the calipers are going bad...but...your brake pedal pushes a rod into the master cylinder to force fluid through the brake lines to the calipers, if you have to pull the pedal back to get them to release them....it sounds like your master cyliner is stay compressed, which would force fluid through all the brake lines, not just the front...so this doesn't make much sense. Make sure your brake booster is connected to a good vacuum source such as the intake. Long story short, I would NOT drive the car until this gets fixed, bring it in and get it checked out. Let us know...
__________________
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sticky Tires??? | moponys | Windsor Power | 4 | 11-18-2002 07:22 PM |
| Sticky pedal | Scappoose | Windsor Power | 6 | 02-04-2002 02:12 PM |
| Sticky Injector? | PureStreet | Windsor Power | 1 | 07-27-2001 01:28 PM |
| What donor car can I use to convert drum brakes to disc brakes on my 65 Mustang? | Mo65 | Classic Mustangs | 1 | 06-30-1999 01:50 PM |