MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-14-2008, 09:39 AM   #1
chadrueckert
Registered Member
 
Join Date: Feb 2008
Posts: 8
Default Engine Noise and Power Loss

I have an 89 GT with just over 100,000 miles on it. Over the last few thousand miles there is a ticking sound that has gotten gradually louder. The tick happens as the rpm's increase and its frequency increases with the RPM's. I've also noticed that as the tick has gotten louder the engine has lost noticeable power. Any ideas on what could be causing this? Thanks in advance!
chadrueckert is offline   Reply With Quote
Old 04-14-2008, 11:26 AM   #2
chadrueckert
Registered Member
 
Join Date: Feb 2008
Posts: 8
Default Re: Engine Noise and Power Loss

I'd like to add, that the noise doesn't occur if the car is in neutral and I rev the engine. It sounds fine when I do this. The sound only occurs when I am in gear and accelerating. By the way the car is a T5. I hope this helps.
chadrueckert is offline   Reply With Quote
Old 04-15-2008, 10:44 AM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: Engine Noise and Power Loss

I was thinking a stuck lifter but your second post is throwing me off.

With a stuck lifter you would lose power but it would tick all the time.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 04-15-2008, 11:13 AM   #4
chadrueckert
Registered Member
 
Join Date: Feb 2008
Posts: 8
Default Re: Engine Noise and Power Loss

Thanks for the reply. I thought it was something with the engine at first, but now I'm not so sure. If I leave the car in neutral and rev the engine all the way up to 5,000 rpms it sounds fine. The ticking sound only happens when the car is in gear and accelerating. Is there anything with the transmission that could be causing this?
chadrueckert is offline   Reply With Quote
Old 04-22-2008, 09:10 AM   #5
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: Engine Noise and Power Loss

my dieing t-5 made a clicking noise, but i could hear it was the t-5, not the motor, can you distinguish that? or if it is a topend tick?
Check your rockers.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 04-22-2008, 09:11 AM   #6
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: Engine Noise and Power Loss

so only under load? has to be an exhaust leak then.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 04-22-2008, 11:19 AM   #7
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: Engine Noise and Power Loss

Quote:
Originally Posted by Coupe50h View Post
so only under load? has to be an exhaust leak then.
Or detonation!!!!!!!!!!!!

What is your initial timing set at?
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 04-22-2008, 01:25 PM   #8
chadrueckert
Registered Member
 
Join Date: Feb 2008
Posts: 8
Default Re: Engine Noise and Power Loss

Thanks for your replies. I will check on the timing. I know it hasn't been adjusted since I've owned the car (5 years).

Regarding the Exhaust Leak, I wanted to be clear on what under load meant(accelerating, or revving?) The engine doesn't make the noise when revving only when accelerating. The noise is something I've been noticing for a year or two and it has gradually gotten worse, and now it seems to be affecting performance.

Is there an easy way to check for leaks?

Once again thanks for all the help!
chadrueckert is offline   Reply With Quote
Old 04-29-2008, 09:38 AM   #9
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: Engine Noise and Power Loss

Quote:
Originally Posted by chadrueckert View Post
Thanks for your replies. I will check on the timing. I know it hasn't been adjusted since I've owned the car (5 years).

Regarding the Exhaust Leak, I wanted to be clear on what under load meant(accelerating, or revving?) The engine doesn't make the noise when revving only when accelerating. The noise is something I've been noticing for a year or two and it has gradually gotten worse, and now it seems to be affecting performance.

Is there an easy way to check for leaks?

Once again thanks for all the help!
pull your e-brake, put it in 1st gear and put a load on it, see if you can stay stationary, have someone stand off to the side with the hood open, listen for the exhaust tick, just be careful, we all know the e-brake wont hold a stang to well.
If it is losing alot of power, then it does sound like detonation, good luck
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help!!! Engine ticking - loss of power!!!! Notchback5.0L Windsor Power 2 06-05-2003 06:22 PM
Loss of POWER!!!!!! Please HELP!! 1jimmy__d Windsor Power 12 08-20-2002 09:48 AM
loss of power 88fivepointoh Windsor Power 5 08-13-2002 12:04 PM
Loss Power sleekgreen Windsor Power 4 06-13-2002 10:23 AM
power loss??? white99cobra121 Blue Oval Lounge 3 07-04-2001 06:45 PM


All times are GMT -5. The time now is 09:27 AM.


SEARCH