ignition help

proslow · 05-20-2008, 08:26 AM

so im back

and i have alot of stuff done on the car. its almost ready to run but im haveing a probelm with the ignition on it. i can turn the key on to "run" and the fuel pump doesnt turn on but when i go to crank the motor over it turns on???? also the motor wont turn over when you crank it with the key. how ever when you jump the starter relay it will crank???? also the sterio doesnt work which worked b4. but i have power windows and locks and they work like they should with the key on. like normal any ideas? i thought it was the starter relay but ive put 2 in and its not it. but im not getting power to the other side of the relay or the little red/blue wire on the relay. any help???? i need this going by friday its a 92 motor and computer.

goodyear1984 · 06-28-2008, 07:06 PM

hey idk what u have done to the car but first make sure that u have the the wires on the starter silinoid right ..i thing the computer power is the blue wire...on side is a bunch of wires and the other is just the cable for the starter motor...if that checks ok make sure all the grounds are hooked up.....also might have a bad ignition switch

05-20-2008, 08:26 AM	#1
proslow Registered Member Join Date: Mar 2008 Posts: 6	ignition help so im back and i have alot of stuff done on the car. its almost ready to run but im haveing a probelm with the ignition on it. i can turn the key on to "run" and the fuel pump doesnt turn on but when i go to crank the motor over it turns on???? also the motor wont turn over when you crank it with the key. how ever when you jump the starter relay it will crank???? also the sterio doesnt work which worked b4. but i have power windows and locks and they work like they should with the key on. like normal any ideas? i thought it was the starter relay but ive put 2 in and its not it. but im not getting power to the other side of the relay or the little red/blue wire on the relay. any help???? i need this going by friday its a 92 motor and computer.

06-28-2008, 07:06 PM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: ignition help hey idk what u have done to the car but first make sure that u have the the wires on the starter silinoid right ..i thing the computer power is the blue wire...on side is a bunch of wires and the other is just the cable for the starter motor...if that checks ok make sure all the grounds are hooked up.....also might have a bad ignition switch __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which MSD ignition?	Scrapla	Windsor Power	7	06-09-2004 07:50 PM
msd ignition	ponyexpress289	Classic Mustangs	8	05-20-2002 09:33 PM
Help with ignition	elma22	Windsor Power	0	07-18-2001 01:39 AM
What Is the best Ignition?????	Stang Runner	Windsor Power	7	07-08-2001 09:09 PM
MSD Ignition	89LXNB	Windsor Power	4	01-25-2001 02:19 PM