MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 09-08-2008, 02:56 AM   #1
Lexirod
Registered Member
 
Join Date: Sep 2008
Posts: 2
Default Engine Swap 351 for 2.3 Liter 90 LX convt

Can anyone tell me how much trouble i am getting into with this. The 351 is a 1969.
Lexirod is offline   Reply With Quote
Old 09-10-2008, 06:26 PM   #2
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: Engine Swap 351 for 2.3 Liter 90 LX convt

need more info than you are giving..carb or fuel injection?do you have a tranny?the brakes will work but they are smaller.it will bolt right in...it depends on what parts you have and what amount of money u have and what you want to exspect when its done
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 09-10-2008, 08:57 PM   #3
Lexirod
Registered Member
 
Join Date: Sep 2008
Posts: 2
Default Re: Engine Swap 351 for 2.3 Liter 90 LX convt

Quote:
Originally Posted by goodyear1984 View Post
need more info than you are giving..carb or fuel injection?do you have a tranny?the brakes will work but they are smaller.it will bolt right in...it depends on what parts you have and what amount of money u have and what you want to exspect when its done
It will be a carb trans is auto. I would like to get rid of the computer. Can this be done easily or is it a pain in the a$$.
Lexirod is offline   Reply With Quote
Old 09-15-2008, 05:34 PM   #4
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: Engine Swap 351 for 2.3 Liter 90 LX convt

well it is easy,if you have basic now how.i have done a few of them.the engine will bolt right in.idk what trans u will use but a c4 will use the same drive shaft.minor work to the crossmember.then u just have a small amount of wiring.then change the fuel sending unit and fuel lines witch arent a big deal.really its a weekend job to do it.then after you get it running i would change the rear end the 4cyl have a 7.5 and change to the v8 rear end witch is a 8.8 posi.the ft brakes are smaller but u can see how it stops and see if u wanna change them
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Starting and Stalling 1988 4-cyl Convt. ziggy555 Small Ponies 10 05-17-2008 03:11 AM
engine swap mike8232 Small Ponies 5 03-07-2007 01:29 AM
engine swap indytrucks Windsor Power 16 09-25-2003 09:24 AM
Engine swap 4 to 8 cyl j6stang23 Windsor Power 4 04-17-2003 10:24 PM
Was there ever a 4.0 liter in the foxbodies? Kamaro Killer Blue Oval Lounge 7 11-14-2002 08:21 PM


All times are GMT -5. The time now is 01:14 PM.


SEARCH