Adjustable FPR recommendations

95GTS · 01-28-2001, 02:06 PM

What adjustable fpr(s) do you recommend? Need one for an 89 GT: Cobra intake, GT40P heads, E303 cam, 24 lb. injectors and MAF, 70mm TB, 190 lph fuel pump.

------------------
1996 Mustang GTS

NOS_Notch · 01-28-2001, 04:27 PM

Most all of them are good.
I heard very good things about the kirban.
Stay w/ a stock setting of 36 lbs. though

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

withamc · 01-28-2001, 11:37 PM

Don't get the $50 Hypertech. I bought a $99 BBK - mine leaked. I've heard they have a tendency to do so. Had to tighten the three Allen head screws on the bottom and it's been good ever since.
I've heard to run them at 39 lbs though. ??

[This message has been edited by withamc (edited 01-28-2001).]

Jeff Chambers · 01-29-2001, 07:27 AM

Stay away from the Paxton/Aeromotive unit. Lots of folks have had problems with the bladders going bad in them. They may have fixed the problem in recent history, but I still don't trust them. I had the Paxton go bad in less than a year. Replaced it with a Kirban and its been good for three years now.

------------------
Jeff Chambers
Trophy Stock #3
11.97 Seconds / 114.5 MPH
Chambers Racing Team

01-28-2001, 02:06 PM	#1
95GTS Git jiggy Join Date: Oct 1999 Location: MO USA Posts: 865	Adjustable FPR recommendations What adjustable fpr(s) do you recommend? Need one for an 89 GT: Cobra intake, GT40P heads, E303 cam, 24 lb. injectors and MAF, 70mm TB, 190 lph fuel pump. ------------------ 1996 Mustang GTS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adjustable fuelpressure ????????????	Robert_5_liter	Windsor Power	1	10-09-2001 12:35 PM
Adjustable Proportioning Valve (Brakes)	RMARIANI	Windsor Power	2	07-05-2001 06:27 AM
Adjustable Struts.	Stampede	Windsor Power	1	01-17-2001 04:29 PM
FUEL PUMP RECOMMENDATIONS?	LOCASH	Windsor Power	5	01-05-2001 03:03 PM
IS CAMBER ADJUSTABLE ON 86?	LOCASH	Windsor Power	1	01-02-2001 01:40 PM

01-28-2001, 04:27 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	Most all of them are good. I heard very good things about the kirban. Stay w/ a stock setting of 36 lbs. though ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com

01-28-2001, 11:37 PM	#3
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Don't get the $50 Hypertech. I bought a $99 BBK - mine leaked. I've heard they have a tendency to do so. Had to tighten the three Allen head screws on the bottom and it's been good ever since. I've heard to run them at 39 lbs though. ?? [This message has been edited by withamc (edited 01-28-2001).]

01-29-2001, 07:27 AM	#4
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	Stay away from the Paxton/Aeromotive unit. Lots of folks have had problems with the bladders going bad in them. They may have fixed the problem in recent history, but I still don't trust them. I had the Paxton go bad in less than a year. Replaced it with a Kirban and its been good for three years now. ------------------ Jeff Chambers Trophy Stock #3 11.97 Seconds / 114.5 MPH Chambers Racing Team