Injector Info

Shawn88GT · 10-12-2008, 09:14 PM

Need to replace stock injectors. What is the OE lbs./hr and what would be the best upgrade. At work I have replaced dozens of injectors but never had to deal with impedence. What ohms do I replace with in a 88 GT?

goodyear1984 · 10-12-2008, 11:56 PM

the stock are 19#.did u convert to mass air if not u will need a chip.if u did u need a maf housing calibrated for thoes injectors.its still a good idea to get it tuned.what are ur mods?y do u want to change injectors?

Shawn88GT · 10-13-2008, 07:27 PM

Have not converted to mass air. The only mods are exhuast. I didn't plan to replace injectors but during the rebuild when I pulled the injector rail out 4 of the injectors broke the hats off the bottom. Aftermarket injectors are $75 each. Online I can get a set of 8 for $210. Don't plan to go blown so stay with 19#? What about ohms?

goodyear1984 · 10-14-2008, 11:02 AM

u can buy just the ends of the injectors.dont go bigger stay with 19# if u get new injectors.idk bout the ohms but if u get some just get ford racing 19# they will be what u need

10-12-2008, 09:14 PM	#1
Shawn88GT Registered Member Join Date: Sep 2008 Posts: 7	Injector Info Need to replace stock injectors. What is the OE lbs./hr and what would be the best upgrade. At work I have replaced dozens of injectors but never had to deal with impedence. What ohms do I replace with in a 88 GT?

10-12-2008, 11:56 PM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Injector Info the stock are 19#.did u convert to mass air if not u will need a chip.if u did u need a maf housing calibrated for thoes injectors.its still a good idea to get it tuned.what are ur mods?y do u want to change injectors? __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

10-13-2008, 07:27 PM	#3
Shawn88GT Registered Member Join Date: Sep 2008 Posts: 7	Re: Injector Info Have not converted to mass air. The only mods are exhuast. I didn't plan to replace injectors but during the rebuild when I pulled the injector rail out 4 of the injectors broke the hats off the bottom. Aftermarket injectors are $75 each. Online I can get a set of 8 for $210. Don't plan to go blown so stay with 19#? What about ohms?

10-14-2008, 11:02 AM	#4
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Injector Info u can buy just the ends of the injectors.dont go bigger stay with 19# if u get new injectors.idk bout the ohms but if u get some just get ford racing 19# they will be what u need __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help? injector question	Z28EATR	Windsor Power	7	02-15-2003 02:23 AM
Injector recommendations	RobertD	Windsor Power	5	08-19-2001 10:46 PM
injector size ???	K.C. 5.0	Windsor Power	3	07-05-2001 09:57 AM
injector size	mustangmaniac247	Windsor Power	4	04-18-2001 01:28 PM
Injector size?	Smokedawg	Windsor Power	10	04-11-2001 09:23 PM