Sn95 seats in a foxbody......

90dpscoupe · 10-04-2001, 03:35 AM

Do they bolt in? i bet they are quite comfortable, has anyone tried this? i wouldnt mind having some black or red ones, and if so, do they hook up to the connector?

In my previous post, i was just thinking about fox gt seats, now im thinking more comfort.

10-04-2001, 03:45 AM

i don't know if they are a bolt in but with a mod or too if they don't i have modded track's for other type's of seat's that worked out ok , a freind of mine put a late model set of t. a . seat's in a 73 mach we had to do a little bit of rigging but it worked.good luck.

------------------

Dark_5.0 · 10-04-2001, 07:21 AM

I have 95' seats in my car they are a direct bolt on even if they are electric its easy money and take 5 minutes a seat to rewire it.

Good luck

------------------
88 mustang gt convertible bored to 306 BBk equal length headers, mac cold air fender kit, 3.73 FMS gears, Steeds Tri-ax shifter, Steeda underdrive pullies, Custom off road X-pipe, 2 chamber flow masters, cowl hood, nitto drag radials, ford racing clutch, 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs. (Best E.T. 14.79@93mph @3000ft)

Five0 · 10-04-2001, 05:15 PM

I met someone at the track the other night that had sn95 seats in a fox body and they look good and yes they were comfortable.

He also said they were a direct bolt in.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX

90dpscoupe · 10-07-2001, 08:53 PM

thnx guys, so they have to be rewired? oh well if it is easy enough, im gonna start looking now, maybe the classifieds.....thnx again.

JR 302GT · 03-02-2002, 12:35 PM

I just found a nice set out of a 96 Mustang but didn't know weather or not I could use both the front and the back or just the front. Anyone know?

John

Dark_5.0 · 03-02-2002, 02:19 PM

Only the front seats will fit the rear seats are different.

DemonGT · 03-03-2002, 04:34 AM

here is a pic of 2001 seats in a fox...direct bolt in

Coupe5oh · 03-03-2002, 04:45 AM

Wow! one of my old threads! those look awesome dude, I never found any back then, however i did come across some 96 white leathers last week, but my interior is red, but my car is white, kinda want black ones, glad you posted that pick man

my lx seats are really feeling uncofortable right now, how much you pay for those?.........peace

DemonGT · 03-03-2002, 03:37 PM

sorry man..thats not my car..i wish it was but its not..i seen and got the pic off the corral forum..try posting a topic about the seats and that pic over there and im sure you could find out..i know i remember the guy saying he got them off ebay so i checked it out and i think they were like 500 for both or something..hope this helps..later

Mach 1 · 03-03-2002, 03:53 PM

You can buy Saleens old seats also. I saw a story about it somewhere. They are brand new factory seats that he replaces with Recaros when he builds a Saleen and sells them for $500/pair I think.

When or did they ever improve the factory seats from the crappy fox body style of reclining mechanism? Are the newer SN95 seats reclining mechanism just as crappy?

bigballer811 · 03-04-2002, 03:43 AM

I was wondering how much it would cost to put leather seats into a 95 vert. I would like to put in the two front seats and the back seat too, but i'd settle for just the front two, can anyone give me a price for all that, thanks.

Mach 1 · 03-04-2002, 10:45 AM

depends on what seats you want? Seats vary greatly in price and quality. The used factory seats are the cheapest way to go, new aftermarket ones are fairly expensive.

89LX boosted cobra · 03-15-2009, 09:25 PM

does anyone know if 01 cobra seats will fit into an 89LX?

10-04-2001, 03:35 AM	#1
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Sn95 seats in a foxbody...... Do they bolt in? i bet they are quite comfortable, has anyone tried this? i wouldnt mind having some black or red ones, and if so, do they hook up to the connector? In my previous post, i was just thinking about fox gt seats, now im thinking more comfort.

03-02-2002, 12:35 PM	#6
JR 302GT Registered Member Join Date: Feb 1999 Location: Altoona, PA Posts: 31	Front & back? I just found a nice set out of a 96 Mustang but didn't know weather or not I could use both the front and the back or just the front. Anyone know? John

03-02-2002, 02:19 PM	#7
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Only the front seats will fit the rear seats are different. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

03-03-2002, 04:45 AM	#9
Coupe5oh Registered Member Join Date: Nov 2001 Location: SanAntonio, Tx Posts: 734	Wow! one of my old threads! those look awesome dude, I never found any back then, however i did come across some 96 white leathers last week, but my interior is red, but my car is white, kinda want black ones, glad you posted that pick man my lx seats are really feeling uncofortable right now, how much you pay for those?.........peace __________________ Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph

03-03-2002, 03:37 PM	#10
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	sorry man..thats not my car..i wish it was but its not..i seen and got the pic off the corral forum..try posting a topic about the seats and that pic over there and im sure you could find out..i know i remember the guy saying he got them off ebay so i checked it out and i think they were like 500 for both or something..hope this helps..later __________________ '91 GT,410W,10.5 to 1 comp,Victor Jr. heads,Victor 5.8 intake,FTI cam,Crane retro fit lifters,Scorpian 1.6 RR's,Melling HV oil pump,MSD distro.,Canton oil pan,FMS flywheel,Romac balancer,FMS timing chain,Accufab 90mm TB,C&L 76mm maf, 42lbers,HD clutch,K&N air filter,Mac long tubes,Pro dumps,powerchamber,FMS 9mm wires,180 thermostat,Ford Racing gauges,5inch Tach,centerline convo pro's,nitto DR's,Pro3i lower control arms,50/50 shocks,3.55 gears,TFS HD diff. cover Next year: Tremec TKO,Spec stage 3 clutch,alum driveshaft,complete fuel system www.angelfire.com/linux/demondan

10-04-2001, 03:45 AM	#2
mustang marty gt Guest Posts: n/a	i don't know if they are a bolt in but with a mod or too if they don't i have modded track's for other type's of seat's that worked out ok , a freind of mine put a late model set of t. a . seat's in a 73 mach we had to do a little bit of rigging but it worked.good luck. ------------------

10-04-2001, 07:21 AM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I have 95' seats in my car they are a direct bolt on even if they are electric its easy money and take 5 minutes a seat to rewire it. Good luck ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers, mac cold air fender kit, 3.73 FMS gears, Steeds Tri-ax shifter, Steeda underdrive pullies, Custom off road X-pipe, 2 chamber flow masters, cowl hood, nitto drag radials, ford racing clutch, 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires. Edelbrock 1 1/2 inch drop springs. (Best E.T. 14.79@93mph @3000ft)

10-04-2001, 05:15 PM	#4
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	I met someone at the track the other night that had sn95 seats in a fox body and they look good and yes they were comfortable. He also said they were a direct bolt in. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX

10-07-2001, 08:53 PM	#5
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	thnx guys, so they have to be rewired? oh well if it is easy enough, im gonna start looking now, maybe the classifieds.....thnx again.

03-03-2002, 03:53 PM	#11
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	You can buy Saleens old seats also. I saw a story about it somewhere. They are brand new factory seats that he replaces with Recaros when he builds a Saleen and sells them for $500/pair I think. When or did they ever improve the factory seats from the crappy fox body style of reclining mechanism? Are the newer SN95 seats reclining mechanism just as crappy? __________________ 2002 GT 1993 GT (SOLD) '93 Mustang GT RHC member #142

03-04-2002, 03:43 AM	#12
bigballer811 Registered Member Join Date: Feb 2002 Posts: 14	I was wondering how much it would cost to put leather seats into a 95 vert. I would like to put in the two front seats and the back seat too, but i'd settle for just the front two, can anyone give me a price for all that, thanks.

03-04-2002, 10:45 AM	#13
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	depends on what seats you want? Seats vary greatly in price and quality. The used factory seats are the cheapest way to go, new aftermarket ones are fairly expensive. __________________ 2002 GT 1993 GT (SOLD) '93 Mustang GT RHC member #142

03-15-2009, 09:25 PM	#14
89LX boosted cobra 89LX soon 13psi Join Date: Mar 2009 Location: ga Posts: 16	Re: Sn95 seats in a foxbody...... does anyone know if 01 cobra seats will fit into an 89LX?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear SN95 Seats in Fox Notch...Update!	Mustangbelle306	Blue Oval Lounge	17	11-20-2002 08:24 PM
SN95 seats	VeNuM	Appearance & Detailing	1	07-11-2002 04:12 PM
SN95 Seats in a Fox Body??	Mustangbelle306	Blue Oval Lounge	13	06-30-2002 10:23 PM
sn95 engine in a foxbody	saleen243	Windsor Power	1	04-20-2002 12:03 AM
will sn95 convert rear seats fit in a sn93 convert???	LX XLR8R	Windsor Power	4	06-05-2001 10:22 PM