MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-17-2009, 11:05 PM   #1
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default people with strokers what tranny are you running

well its time to get a tranny...they stroker didnt like the t5wc its in picecs..i have between 450 to 500hp and will be spraying a 150 shot with slicks and car is 3000 lbs.i have herd so many mixed reviews on the tko600 and some richmond boxes.2 or 3 grand is alot to spend if its gonna blow.
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 03-29-2009, 09:59 AM   #2
buddha
Registered Member
 
Join Date: Feb 2000
Location: Washington, MO
Posts: 327
Default Re: people with strokers what tranny are you running

Put an auto in it and be done. Otherwise if your really wanting the stickshift, I'd have a G-force prepped tranny. At least you'll have a chance of it lasting awhile.
__________________
93' Cobra with a cogged NOVI 2k, R331
buddha is offline   Reply With Quote
Old 04-01-2009, 05:09 PM   #3
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: people with strokers what tranny are you running

yea i hear that but i am good at shifting and i like the overdrive because the track is 45min away.the c4 would be the way to go but im gonna get board with out banging gears
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 04-15-2009, 08:49 AM   #4
Jayme
12 Sec Stock Motor Club
 
Join Date: Jun 2002
Location: Baytown, TX
Posts: 15
Thumbs up Re: people with strokers what tranny are you running

i have a G-Force 5-Speed behind my 331 with a Spec St. 3 clutch, i like it. No complaints.
__________________
-Jayme

1990 Mustang LX
12.16 @ 116.65mph
My NEW MustangWorks Page

1990 Mustang GT -Sold-
12.996 @ 104.21mph
1.72 RRs, Pro-M 75mm MAF, Kirban Regulator, BBK Headers, BBK Off-Road X-Pipe, MAC Cat-Back, ASP Pulleys, BBK 70mm TB/EGR, BBK Cold Air, 3.73 Gears, Hurst Short Throw, King Cobra Clutch, 4-Cyl Front Springs, BBK Rear, 90/10 Struts & 50/50 Shocks, Lakewood Lower Control Arms and Weld Draglites.
My MustangWorks Page
Jayme is offline   Reply With Quote
Old 04-16-2009, 11:00 AM   #5
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: people with strokers what tranny are you running

Quote:
Originally Posted by goodyear1984 View Post
well its time to get a tranny...they stroker didnt like the t5wc its in picecs..i have between 450 to 500hp and will be spraying a 150 shot with slicks and car is 3000 lbs.
What kind of times and 60ft are you pulling with your 500hp 347? Just wondering..

My stock T5 held up to my 331 with a 150shot, running 11.00's with 1.5 60ft's, launching at 6k off the line..

You could go with a T45 or the tremmec, both will hold up to quite a bit of abuse. Good luck
__________________
USMC302 is offline   Reply With Quote
Old 04-17-2009, 11:36 PM   #6
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: people with strokers what tranny are you running

well here is the story..i was running 11.8 when it was a injected 302 with a 150 shot at a 1.6 60ft..then i put the 347 in and ran a 12.2 because i was having carb problems.then i fixed the carb,it was wayy faster and blu the teeth off 2nd gear and the countershaft, so i never go to drag it after i fixed the carb.i am getting a tko this weekend for next to nothing so im gonna put it in and see what happends
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 04-20-2009, 02:20 PM   #7
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: people with strokers what tranny are you running

I would go with a G-force. The TKO 600 still has issues that need to be worked out.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 05-03-2009, 07:01 PM   #9
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: people with strokers what tranny are you running

well i got a tko 500 for a great deal from a good friend and it seems to work great...also i got a new carb..quick fuel technology 750 much better throttle response...
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone running a C-4 tranny I need HELP!!!!!!!! mattcstang Racer's Club House 5 09-07-2006 11:43 PM
Info on 351w strokers Dave_mustang_50 Windsor Power 13 08-01-2005 05:25 PM
Anyone know where to buy crate strokers ? Ricks86GT Windsor Power 4 06-14-2001 10:24 PM
Are 347 & 393 strokers emissions legal?? Stang_ROTY Windsor Power 6 05-08-2001 08:18 PM
STROKERS ricky1 Windsor Power 4 02-21-2001 01:47 PM


All times are GMT -5. The time now is 03:23 AM.


SEARCH