trick flow heads question for a 93 5.0

fongo · 04-27-2010, 10:06 PM

Hi everyone.
I'm thinking of putting new heads on my 93 5.0 (blew the head gasket on the stock E7 heads).
I looked at the Trick Flow Twisted Wedge - Small Block Ford Aluminum, Non O-Ringed With Standard Spring - #TFS-51400002.
I'm looking for some improved performance over stock, but nothing crazy (no racing application). Vendor says its a straight up replacement to stock heads. Aside from new gaskets, what else is recommended to change (i.e. new rods, rockers etc)

? (gotta a small budget LT $2K).
Any feedback is appreciated. Thanks.
fongo

srv1 · 05-08-2010, 04:31 PM

Pushrods, rocker arms and some new lifters. Also a better intake, bigger injectors and a bigger mass air.

James

goodyear1984 · 05-15-2010, 10:24 PM

i would put a cam in befor wasting the money on lifters.the oe rollers last forever.pushrods will prolly be a diff size any ways.make sure u install the head gaskets with the big coolant hole in the back or it will run hott

04-27-2010, 10:06 PM	#1
fongo Registered Member Join Date: Jan 1999 Location: Farmingdale, NY Posts: 139	trick flow heads question for a 93 5.0 Hi everyone. I'm thinking of putting new heads on my 93 5.0 (blew the head gasket on the stock E7 heads). I looked at the Trick Flow Twisted Wedge - Small Block Ford Aluminum, Non O-Ringed With Standard Spring - #TFS-51400002. I'm looking for some improved performance over stock, but nothing crazy (no racing application). Vendor says its a straight up replacement to stock heads. Aside from new gaskets, what else is recommended to change (i.e. new rods, rockers etc)? (gotta a small budget LT $2K). Any feedback is appreciated. Thanks. fongo __________________ 1993 GT, MAC Fenderwell Cold Air Induction; Accel dist.,Splitfire plugs, BBK: 1 5/8 unequal length shorties, hi flow H-pipe w/ cats; Flowmasters 2 chamber American Thunder catback system, Motorsports 3-core radiator, 180º thermostat, BBK adj. clutch quad...the rest is bone stock!..but more mods to come!!

05-08-2010, 04:31 PM	#2
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	Re: trick flow heads question for a 93 5.0 Pushrods, rocker arms and some new lifters. Also a better intake, bigger injectors and a bigger mass air. James __________________ Cobra brakes are on! Finally..... ------------------------------------------------

05-15-2010, 10:24 PM	#3
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: trick flow heads question for a 93 5.0 i would put a cam in befor wasting the money on lifters.the oe rollers last forever.pushrods will prolly be a diff size any ways.make sure u install the head gaskets with the big coolant hole in the back or it will run hott __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
trick flow stage 1, 1.7 rr, and gt40 heads	5150coupe	Windsor Power	7	09-26-2007 11:21 PM
AFR or Trick Flow Heads	NitroNixon	Windsor Power	13	09-02-2004 06:26 PM
Torque specs for trick flow heads?	Coupe5oh	Windsor Power	1	03-16-2002 09:25 AM
Trick Flow heads???	AB89GT	Windsor Power	10	09-06-2001 05:57 PM
Edelbrock vs Trick Flow Heads????	Blaster	Windsor Power	8	04-25-2001 04:58 PM