MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 06-16-2012, 05:20 PM   #1
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Question Blew a head gasket??!!

Only spraying a 60 wet shot, one nozzel. Pretty sure I held it too long in forth trying to run down a turbo civic (embarassing as that is)

Any way melted the AFR 165 head to where it had to be welded so it got hot for some reason!!

So turns out I used the cheap fel pro's??
So I'm putting Cometic's on it, I'm fighting the urge to put another cam in it as the TF #1 is VERY streetable, thats what I want but it still falls on it's face at 5300-5400rpm, like the stock cam did at 5000

Any advice on a cam for my engine? (details in sig)
I like the trick flow, so I'm thinking about they're #2 cam.
#1= 221/225 @.050 .499/.510 with 1.6
#2= 224/232 "" .542/.563 ''''
both at 112 seperation. Anyone got any experience with these?

How much driveability you guys think I'll lose?
Any help appriecated!!
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 06-22-2012, 04:04 AM   #2
TrojanHorse
Registered Member
 
TrojanHorse's Avatar
 
Join Date: Jun 2012
Location: MO
Posts: 2
Default Re: Blew a head gasket??!!

Quote:
Originally Posted by skiwesser View Post
Only spraying a 60 wet shot, one nozzel. Pretty sure I held it too long in forth trying to run down a turbo civic (embarassing as that is)

Any way melted the AFR 165 head to where it had to be welded so it got hot for some reason!!

So turns out I used the cheap fel pro's??
So I'm putting Cometic's on it, I'm fighting the urge to put another cam in it as the TF #1 is VERY streetable, thats what I want but it still falls on it's face at 5300-5400rpm, like the stock cam did at 5000

Any advice on a cam for my engine? (details in sig)
I like the trick flow, so I'm thinking about they're #2 cam.
#1= 221/225 @.050 .499/.510 with 1.6
#2= 224/232 "" .542/.563 ''''
both at 112 seperation. Anyone got any experience with these?

How much driveability you guys think I'll lose?
Any help appriecated!!
Did you have any provision to retard the timing when you sprayed?
Were you running a colder plug?

You do know that the Cometic gaskets require a certain finish to the deck & head surface to seal up correctly don't you?

Enter your engine specs and modifications at CamQuest.com and let the experts pick the best cam for your purposes.

Any time you change out a low end cam for a higher end cam you will lose power and some driveability on the lower end.
TrojanHorse is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Head Gasket tarmon8r Windsor Power 1 04-15-2005 07:15 PM
Gasket blew at track USMC302 Power Adders 24 02-10-2004 05:52 PM
NEW HEADS and think the Head Gaskets just blew!! bob93lx Windsor Power 17 04-07-2001 02:51 PM
Yeah... I blew a head gasket RedLilPony Classic Mustangs 1 03-19-2001 11:06 PM
blew a head gasket on a '93 sable st5150 Small Ponies 0 03-21-2000 09:43 PM


All times are GMT -5. The time now is 04:32 AM.


SEARCH