MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-11-2013, 12:42 PM   #1
Talley-Ho
Registered Member
 
Join Date: Jan 2013
Posts: 3
Default Another 302 ID question.

I have an odd one here, hope someone out there has the answer.
Purchased a 77 mustang recently with a 302 in it. It has a T-5 transmission that according to the salvage yard markings is from a 93 mustang. The bell housing and starter appear to have came with the trans.
I assume then that the flywheel is a 157 tooth 50oz counterweight unit. I know that a 77 302 would be the 28.2 oz

It has a slight drive train vibration, but not as bad as I would have thought it would be if it needs a 28.2oz counterbalance.
The guy I got the car from had owned it about 6 months and had not driven it a lot and had no idea about what was done to it prior to when he purchased it.

Long story even longer, I pulled the started to check the casting # and low and behold no casting number, the ridge where they go was not even there. There was a date code there but it was running vertical to the crank in lieu of horizontal with the crank.
2D24,- 2nd year, April 24th. But without a casting code I have know idea of what decade. Checked all over the block but found no numbers any ware .

Anyone ran across this before? I really don’t want to pull the engine just to get the pan off and get the numbers off the crank.
Talley-Ho is offline   Reply With Quote
Old 01-25-2013, 10:47 AM   #2
93CobraR
Registered Member
 
Join Date: Oct 1999
Location: Cincinnati, Ohio
Posts: 1,575
Default Re: Another 302 ID question.

When is the vibration accuring? On acceleration or deacceleration, idle??
93CobraR is offline   Reply With Quote
Old 01-26-2013, 08:13 AM   #3
Talley-Ho
Registered Member
 
Join Date: Jan 2013
Posts: 3
Default Re: Another 302 ID question.

mainly on deacceleration
Talley-Ho is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trans ID Question zach0 Modular Madness 2 01-11-2007 03:30 PM
302 engine question fast_pony Windsor Power 4 05-22-2006 11:06 PM
Question about non H.O. 302's eddielugnutz Windsor Power 2 11-01-2005 03:30 PM
Question on a stock 302... restorin88stang Windsor Power 1 11-04-2001 11:52 PM
302 Question zach0 Windsor Power 2 07-08-2001 07:03 PM


All times are GMT -5. The time now is 10:35 PM.


SEARCH