MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 04-20-2015, 12:22 PM   #1
5point0ta
Registered Member
 
Join Date: Apr 2015
Posts: 1
Default need help dialing in my swap.

So I own a 1985 corolla (ae86), bought a 1985 carbed 5.0 mustang, tow apart both cars and put the 302 and the t5 in the corolla.

I'm running a bone stock non roller motor with an edelbrock 1406 carb, sn95 factory headers to 2 1/4" pipe to 2 1/2" glass packs, no cats, no h pipe. No tstat and 10 degrees base timing.

Issue I'm having is that about 2 minutes into sustained higher rpm operation (donuts, drifting, etc). My headers area glowing red and the car quickly climbs to 220+ and I've gotta go hot lap it to get the heat down. I've owned foxes before and never had this kind of issue.

My only thought is that I might be fuel starving it due to to small of a feed line, the corolla fuel lines that I reused are metric and the feed is slightly less than 5/16 Id (6mm maybe). I'm going to swap for 3/8 hard line to feed to rule that out.

Hoping for any insight y'all might have
Thanks
5point0ta is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
t-5 swap halffast82 Windsor Power 1 03-05-2007 12:13 PM
anyone know of this swap? Edelbrock Built Ford Tough 1 05-25-2005 05:12 PM
5.0 swap 7SecYaRight Windsor Power 0 06-15-2003 01:58 AM
Dialing in cam? BLACK85GT Windsor Power 3 02-18-2003 06:59 PM
5.0 to 4.6 swap Rownd Modular Madness 6 02-05-2002 09:06 PM


All times are GMT -5. The time now is 01:57 AM.


SEARCH