, so then she gets naked...

429mustang · 10-12-2001, 01:38 PM

...just kidding, but I bet it got you to look at my post. Does anyone know if you can get a bellhousing to bolt up a TKO II to a 429/460 and what might be a good clutch to run with the setup and the motor putting out approx. 600hp? I'm also looking into getting a 514 stroker kit, I've heard bad things about one or two of the stroker companies sending wrong cranks, etc., so any info on a good company to deal with would be appreciated.

------------------
86 Mustang GT w/pretty stock 93 5.0 (e-cam,pulleys,injectors, throttlebody,h-pipe,headers) Swapping out the 302 for a 514 stroker(was a 429)-cobrajet heads, solid roller cam, victor intake, TKO II trans, 3.73's w/axles&c-clip eliminaters.

302 LX Eric · 10-12-2001, 03:26 PM

Dude, that wasn't cool...you had me all excited and then this!

Seriously, I have no idea. But you could always try calling D&D Performance in Wixom Mich. They are tranny experts. Their number is (248) 926-6220.

When you do get the 514 installed, keep me posted, I would love to see that thing run at National Trails.

Take care,
E

------------------
1991 5.0 LX Coupe - 38,000 miles

13.17 @ 106.14 mph w/ 2.138 60'

429mustang · 10-12-2001, 05:05 PM

302LXEric, where in columbus do you live-whats your car look like. I live in westerville, I drive an 86 GT-silver w/black hood stripe. Realistically, I probably won't have the motor ready to go in until probably mid next year, but I'll let you know when I do, actually I'd like to get there once more sometime this month, let me know if you go up there.

------------------
86 Mustang GT w/pretty stock 93 5.0 (e-cam,pulleys,injectors, throttlebody,h-pipe,headers) Swapping out the 302 for a 514 stroker(was a 429)-cobrajet heads, solid roller cam, victor intake, TKO II trans, 3.73's w/axles&c-clip eliminaters.

USMC302 · 10-15-2001, 03:58 PM

You shouldn't tease us like that.

429mustang · 10-15-2001, 06:39 PM

Sorry dudes.

JRowlette · 10-16-2001, 08:46 PM

Bastard

84LX89GT · 10-16-2001, 10:49 PM

...you sure got my attention....unfortunately i don't have an answer for your question, but i have thought it myself. Make sure to post what you find, i'm sure alot of people would find that information interesting.

------------------
Mustang Parts Specialties ripped me off, it could happen to you as well.
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

Chevyguy · 10-17-2001, 12:41 PM

That 429/514 might turn even the TKO II to a pile of steaming metal. Maybe you need to go with a C4 or a C6 if that can squeeze in a fox body ??? Most big blocks are just happier with a built up auto. Or heck why not a toploader!!!

------------------
Frank W
90 5.0 LX Notchback Daily driver. K&N filter. Flexalite fan, 3 core radiator. FMS flywheel and Clutch, FMS blue wires Energy Suspension end links, MAC 2.5" cat back FMS aluminum driveshaft, MSD blaster coil, MAC shifter
88 Notch 2.3L FOR SALE! My two Notchbacks
user site
74 Chevy La

FoxBuilder · 10-17-2001, 02:12 PM

I'd check with Lakewood, you will need a blow proof anyways with that beast.

Ya, Eric what does your car look like? Only a few more Wednesdays to go.

------------------
For the performance fanatic
Visit my web page at:
www.geocities.com/getradicalmotors/

302 LX Eric · 10-18-2001, 09:03 AM

FoxBuilder - Trail's still has Wednesday night racing open?!?!? If so, I want to go next Wednesday. I thought they were closed up for the winter? If they are open I have got to get out there! WOO HOO!

Now I just got to get another 250 miles on my new Tremec before I go beat the snot out of it! hehehehe

As for my Stang, it is a 1991 LX Coupe - Oxford White. It looks very stock - even have the orginial "pony" wheels on. Are you heading out to NTR anytime soon? Maybe I can meet you out there?

Take care,
E

------------------
1991 5.0 LX Coupe - 38,000 miles

13.17 @ 106.14 mph w/ 2.138 60'

2FastLX · 10-19-2001, 11:05 AM

Eric, I know it would be a bit of a drive, but we are renting a drag strip for the day over here in Indiana. Only bad thing is it's on the north-western side of Indiana. I have a post in the drag racing forum if for some strange reason you'd want to drive that far. We have about 40 cars coming so far but that will still let you run as many passes as you want.

FoxBuilder · 10-19-2001, 11:57 AM

Eric, Wednesday the 24th is the last Grudge Night. If your going Let me know! I will copy this to your email.

429mustang, are you going?

------------------
For the performance fanatic
Visit my web page at:
www.geocities.com/getradicalmotors/

10-19-2001, 04:35 PM

Now that's cruel................but I guess I knew there'd be a catch

!

------------------
'90 LX 5.0;12K original miles;FMS 3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside weld-on subs;9" K&N cone filter charger;Hurst shifter;Cervini 3" turbo hood;A/C delete;gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS custom chip;Holley 190lb fp;TFS track heat intake (12.299 @ 113mph w/ a 1.78 60')
....soon to be b

10-12-2001, 01:38 PM	#1
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	, so then she gets naked... ...just kidding, but I bet it got you to look at my post. Does anyone know if you can get a bellhousing to bolt up a TKO II to a 429/460 and what might be a good clutch to run with the setup and the motor putting out approx. 600hp? I'm also looking into getting a 514 stroker kit, I've heard bad things about one or two of the stroker companies sending wrong cranks, etc., so any info on a good company to deal with would be appreciated. ------------------ 86 Mustang GT w/pretty stock 93 5.0 (e-cam,pulleys,injectors, throttlebody,h-pipe,headers) Swapping out the 302 for a 514 stroker(was a 429)-cobrajet heads, solid roller cam, victor intake, TKO II trans, 3.73's w/axles&c-clip eliminaters.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust question	chuck88	Windsor Power	4	07-07-2002 10:46 AM
Gone overseas.	mustangman65_79	Blue Oval Lounge	22	02-24-2002 06:43 AM

10-12-2001, 03:26 PM	#2
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Dude, that wasn't cool...you had me all excited and then this! Seriously, I have no idea. But you could always try calling D&D Performance in Wixom Mich. They are tranny experts. Their number is (248) 926-6220. When you do get the 514 installed, keep me posted, I would love to see that thing run at National Trails. Take care, E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60'

10-12-2001, 05:05 PM	#3
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	302LXEric, where in columbus do you live-whats your car look like. I live in westerville, I drive an 86 GT-silver w/black hood stripe. Realistically, I probably won't have the motor ready to go in until probably mid next year, but I'll let you know when I do, actually I'd like to get there once more sometime this month, let me know if you go up there. ------------------ 86 Mustang GT w/pretty stock 93 5.0 (e-cam,pulleys,injectors, throttlebody,h-pipe,headers) Swapping out the 302 for a 514 stroker(was a 429)-cobrajet heads, solid roller cam, victor intake, TKO II trans, 3.73's w/axles&c-clip eliminaters.

10-15-2001, 03:58 PM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	You shouldn't tease us like that.

10-15-2001, 06:39 PM	#5
429mustang Registered Member Join Date: May 2001 Location: westerville, OH USA Posts: 618	Sorry dudes.

10-16-2001, 08:46 PM	#6
JRowlette Registered Member Join Date: Apr 2001 Location: Bowling Green, KY Posts: 95	Bastard

10-16-2001, 10:49 PM	#7
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	...you sure got my attention....unfortunately i don't have an answer for your question, but i have thought it myself. Make sure to post what you find, i'm sure alot of people would find that information interesting. ------------------ Mustang Parts Specialties ripped me off, it could happen to you as well. '84 Mustang 5.0 LX my LX '89 Mustang GT my GT

10-17-2001, 12:41 PM	#8
Chevyguy Backyard Mechanic/Chemist Join Date: Feb 2001 Location: Acton MA USA Posts: 435	That 429/514 might turn even the TKO II to a pile of steaming metal. Maybe you need to go with a C4 or a C6 if that can squeeze in a fox body ??? Most big blocks are just happier with a built up auto. Or heck why not a toploader!!! ------------------ Frank W 90 5.0 LX Notchback Daily driver. K&N filter. Flexalite fan, 3 core radiator. FMS flywheel and Clutch, FMS blue wires Energy Suspension end links, MAC 2.5" cat back FMS aluminum driveshaft, MSD blaster coil, MAC shifter 88 Notch 2.3L FOR SALE! My two Notchbacks user site 74 Chevy La

10-17-2001, 02:12 PM	#9
FoxBuilder Registered Member Join Date: Sep 1999 Location: Columbus, Ohio Posts: 233	I'd check with Lakewood, you will need a blow proof anyways with that beast. Ya, Eric what does your car look like? Only a few more Wednesdays to go. ------------------ For the performance fanatic Visit my web page at: www.geocities.com/getradicalmotors/

10-18-2001, 09:03 AM	#10
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	FoxBuilder - Trail's still has Wednesday night racing open?!?!? If so, I want to go next Wednesday. I thought they were closed up for the winter? If they are open I have got to get out there! WOO HOO! Now I just got to get another 250 miles on my new Tremec before I go beat the snot out of it! hehehehe As for my Stang, it is a 1991 LX Coupe - Oxford White. It looks very stock - even have the orginial "pony" wheels on. Are you heading out to NTR anytime soon? Maybe I can meet you out there? Take care, E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60'

10-19-2001, 11:05 AM	#11
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Eric, I know it would be a bit of a drive, but we are renting a drag strip for the day over here in Indiana. Only bad thing is it's on the north-western side of Indiana. I have a post in the drag racing forum if for some strange reason you'd want to drive that far. We have about 40 cars coming so far but that will still let you run as many passes as you want.

10-19-2001, 11:57 AM	#12
FoxBuilder Registered Member Join Date: Sep 1999 Location: Columbus, Ohio Posts: 233	Eric, Wednesday the 24th is the last Grudge Night. If your going Let me know! I will copy this to your email. 429mustang, are you going? ------------------ For the performance fanatic Visit my web page at: www.geocities.com/getradicalmotors/

10-19-2001, 04:35 PM	#13
bada$$lx Guest Posts: n/a	Now that's cruel................but I guess I knew there'd be a catch ! ------------------ '90 LX 5.0;12K original miles;FMS 3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside weld-on subs;9" K&N cone filter charger;Hurst shifter;Cervini 3" turbo hood;A/C delete;gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS custom chip;Holley 190lb fp;TFS track heat intake (12.299 @ 113mph w/ a 1.78 60') ....soon to be b