351W injectors

stanger8172 · 02-05-2001, 09:02 PM

Would putting injectors out of a 5.8L into to a 5.0L give it more power?

----------------------
'86 LX 306 HO, C-4, ported stock heads, Holley AFPR, E303, 289 HI PO rods, K&N, BBK 1 5/8 shorties, Warlock mufflers, dumps, 4.33'd

93CobraR · 02-05-2001, 09:53 PM

Nope. From what I here some of them are longer and won't fit a Mustang. Also most of them in a 351 from what I know are 19lbs. which are the same that are factory in a Mustang. If they are 24lbs. then you need to have you MAF calibrated for them. They only way a bigger injector will give you more power is if your motor is starving from fuel now.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

02-05-2001, 09:02 PM	#1
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	351W injectors Would putting injectors out of a 5.8L into to a 5.0L give it more power? ---------------------- '86 LX 306 HO, C-4, ported stock heads, Holley AFPR, E303, 289 HI PO rods, K&N, BBK 1 5/8 shorties, Warlock mufflers, dumps, 4.33'd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advice on injectors...PKRWUD I'd like your advice on this one as well	silver_pilate	Windsor Power	3	06-09-2003 08:59 AM
differences in injectors?	'89GTStang	Windsor Power	9	06-06-2003 02:39 AM
MAF and FPR independent from injectors?	Nixon1	Windsor Power	4	03-01-2003 02:00 AM
will Chevy injectors work in a Ford	tireburner163	Windsor Power	4	06-16-2001 07:16 PM
HP #'s from a built 351W versus FMS 351 versus stroker	stroker393	Windsor Power	0	03-09-2001 10:24 AM

02-05-2001, 09:53 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Nope. From what I here some of them are longer and won't fit a Mustang. Also most of them in a 351 from what I know are 19lbs. which are the same that are factory in a Mustang. If they are 24lbs. then you need to have you MAF calibrated for them. They only way a bigger injector will give you more power is if your motor is starving from fuel now. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html