GT40 Intakes

Smokedawg · 02-07-2001, 11:53 AM

I own a 1990 mustang GT..and i ran into a problem..i let someone take my stock upper and lower intake to port and polish and when they were returned they were ruined..now my question is that i have heard that the ford explorer has the gt40 intakes on them..If so, will the upper and lower intake off the explorer fit right up to all parts on my mustang gt. What years explorer has the intakes i am looking for? Thanks for all info.

------------------
347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

yello95gt · 02-07-2001, 04:16 PM

yes, they will fit, same motor as in explorer except for the p-heads, oil pan, timing cover, etc... Any late model explorer with a 5.0. But you can find them new pretty cheap

NOS_Notch · 02-07-2001, 10:28 PM

Actually there is something that you have to delete/bypass.
Temp sending unit maybe.....?
my buddy had it, not a biggie, but you you do have to make a change.
He had it on a '93 notch

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

02-07-2001, 11:53 AM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	GT40 Intakes I own a 1990 mustang GT..and i ran into a problem..i let someone take my stock upper and lower intake to port and polish and when they were returned they were ruined..now my question is that i have heard that the ford explorer has the gt40 intakes on them..If so, will the upper and lower intake off the explorer fit right up to all parts on my mustang gt. What years explorer has the intakes i am looking for? Thanks for all info. ------------------ 347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 types of GT40 iron heads, not talking abou the P	Hethj7	Windsor Power	5	10-26-2010 09:16 PM
GT40 Intakes- Explorer?	squid	Windsor Power	9	09-22-2010 03:01 AM
GT40 P Headers	Scrapla	Windsor Power	2	01-13-2003 07:41 PM
GT40 intake good enough?	91evilstang	Windsor Power	8	09-02-2001 04:41 PM
Cobra, Edlebrock, GT40, Mac, Explorer Intakes	Gautam	Windsor Power	7	02-07-2001 10:37 PM

02-07-2001, 04:16 PM	#2
yello95gt Registered Member Join Date: Jun 2000 Location: jackson,Ms 39208 Posts: 20	yes, they will fit, same motor as in explorer except for the p-heads, oil pan, timing cover, etc... Any late model explorer with a 5.0. But you can find them new pretty cheap

02-07-2001, 10:28 PM	#3
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	Actually there is something that you have to delete/bypass. Temp sending unit maybe.....? my buddy had it, not a biggie, but you you do have to make a change. He had it on a '93 notch ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com