© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-22-2001, 12:25 AM | #1 |
Registered Member
Join Date: Nov 2000
Location: Maple Ridge B.C. Canada, The Best Place In The World
Posts: 871
|
351w How Much Power? What Cam?
I am going to purchase a stock 351w from a junkyard, & build it up. heres what i want, Now could you tell me what you think & how much power it should produce
351w Short block stock 5.0 fuel lines trick flow twisted wedge heads trick flow "351" intake 30lb injectors pro-m 77mm mass air trick flow 1.6 Rocker arms crane hi-6 ignition & ps-91 coil 190lph pump & AFPR Stock 5.0 t-5 (when she blows, probably a Termec TKO) NOW FOR A CAM, HOW MUCH LIFT COULD I HAVE WITHOUT PISTON-TO-VALVE PROBLEM? I want to stick to the trick flow name & was wondering if I should use stage 1, 2, or 3 cam? also for pushrods i have no clue. I will use the stock 351 until funds grow, with the exception of fuel injection, but with the stock 5.0 19lb injs If you can suggest any other things i missed. thanks! ------------------ 1988 Mustang GT, T-5 No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe (Sounds Mean), K&N Air Filter (Stock Air Box, Removed air silendcer), 198.9 rwhp @4200 (235 Motor!!), 285 lbs-ft @2900 (336 Motor!!!). My Stang |
02-22-2001, 12:58 AM | #2 |
Registered Member
Join Date: Nov 2000
Location: Maple Ridge B.C. Canada, The Best Place In The World
Posts: 871
|
Also
bbk 70mm t-body & egr mac 1-5/8 or 1-3/4 headers Mac 2.5" off rd h pipe Dynomax super turbo, or Mac flowpath cat back 3.55 or 3.73 gears drop engine mounts new flywheel new distributor new (or used) oil pan CAN ANYONE SAY S L E E P E R ???? I'M GOING TO CALL THIS "PROJECT SLEEPER" DDOES THAT SOUND OK TO YALL? ------------------ 1988 Mustang GT, T-5 No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe (Sounds Mean), K&N Air Filter (Stock Air Box, Removed air silendcer), 198.9 rwhp @4200 (235 Motor!!), 285 lbs-ft @2900 (336 Motor!!!). My Stang |
02-22-2001, 01:43 AM | #3 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
Sounds killer, but for a sleeper i would keep some 3 cmbr mufflers, maybe keep the cam lope down, but let us know how it goes.
------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 97.80 Best 60': 2.0047 next mods: subframes, mac h-pipe |
02-22-2001, 02:36 AM | #4 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Damn you, your copying my motor setup exactly! HAHA, its cool. Anyways, with 11:1 compression and my 24lb injectors I'm shooting for about 410hp, and then with good tuning and all about 430-440hp. I think I'm going to have to goto long tubes though to push the 440 mark.
I figure my car is around 340 hp right now at the fly wheel, given its weight and trap speeds. Just the increase in cubes will add 50hp. Then 2 points of compression is 20hp. A well choosen cam should net me about 10 hp more and well thats 80hp and puts me around 420. So I think your on your way to one 11sec sleeper. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more. 13.2@106mph -Shooting for 12's and a 351 slowly in the works! Stock-94 Integra 15.48@91mph |
02-23-2001, 12:50 AM | #5 |
Registered Member
Join Date: Nov 2000
Location: Maple Ridge B.C. Canada, The Best Place In The World
Posts: 871
|
thanks, anyone know what cam?
should i use the 65mm t/body or 70? would bbk longtubes & off road h-pipe work with the 351? Sky, who makes drop motor mounts? thanks ------------------ 1988 Mustang GT, T-5 No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe (Sounds Mean), K&N Air Filter (Stock Air Box, Removed air silendcer), 198.9 rwhp @4200 (235 Motor!!), 285 lbs-ft @2900 (336 Motor!!!). My Stang |
02-23-2001, 01:14 AM | #6 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
Well i would look at some trick flow cams, and i talked to a guy at the track who was running a "lunati" cam, i dont know any specs, but with aluminum "dart" heads and that car sounded good, with a good lopey idle, and he was running low 12's in a 93 gt.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
351w vs 302 how much power can they hold | Axkiker | Windsor Power | 3 | 10-05-2003 11:00 PM |
Lost top end power | bobtodd | Windsor Power | 11 | 08-01-2002 10:28 PM |
Power WIndow ?'s | Coupe Devil | Windsor Power | 5 | 10-23-2001 03:12 PM |
Would an old stock 351w have more power? | BowTie Eater 5 Liter | Windsor Power | 8 | 02-18-2001 10:54 PM |
Electrical power, where to splice? | Chris_H | Windsor Power | 3 | 02-11-2001 08:29 PM |