3:73 or 4:10? AOD stock '95 GT

andrewgarland · 02-26-2001, 02:23 AM

So what'll it be? 3:73's, or 4:10's? I'm gonna get the B&M shift kit too... Thanks guys!

Andy

90dpscoupe · 02-26-2001, 02:34 AM

Well i vote the 4.10's i doubt you'll regret it, and im sure about 99% of everyone here will agree. good luck

specially cuz you have an sn95 style, which is not the lightest of the stangs.

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 97.80
Best 60': 2.0047

next mods: subframes, mac h-pipe

85muffstang · 02-26-2001, 02:39 AM

I put the 3:73 in my ex 95 cobra. even though mine was a manual, I think you would enjoy the 4:10 better. you shouldnt have any issues with highway driving, and you will like the acceleration it gives you. I wished I had gotten the 4:10, trial and error LOL.

------------------
85GT,auto/2400 stall,converted to carb.
edelbrock 600, performer RPM, BBK equal length headers, mallory distr. and ignit., h-pipe, flows, 3:73, converting to five lug and installing 95 cobra rims.

Josh91 · 02-26-2001, 11:25 AM

Definitely get the 4.10. I have had both and the 4.10 are way better than the 3.73. Also, you are going to need a new computer chip to make the 4.10 AOD-E friendly. Several places burn them, I know Dallas Mustang does as well as others.

As for shift kit, you may want to also consider the Transgo or the Baumann. They are the superior product compared to the B&M.

------------------
1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, 4.10's, Steeda STB, for now...

The Original GT-40P Tech Page

fastang · 02-26-2001, 12:01 PM

as long as you dont mind running at 3 grand when your only going 65 mph get the 4:10's If you want your motor to last a little longer get the 373's.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

fiveohpatrol · 02-26-2001, 12:26 PM

if i had to do it over again i would definately get the 4.10's , your heavy beast really needs more gear than the 3.73's, why not some 4.30's ? just kiddin

and about the shift kit, stay away from the B&M, its junk, i had it in mine before i got a rebuild and it sucked a$$ , they guy who rebuilt my tranny made a custom one for cheap and it is way superior to the B&M, go for the Transgo or Baumann like suggested before

------------------
88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install

Josh91 · 02-26-2001, 05:36 PM

He will not turn 3K at 65. I turn 2800 at 70 and that is with a non-lockup converter. If it locked I would only turn 2600 or so. 4.10's all the way in an AOD-E.

------------------
1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, 4.10's, Steeda STB, for now...

The Original GT-40P Tech Page

LX XLR8R · 02-27-2001, 12:24 PM

4.10s def..without a doubt..i got them with my tremec and i wouldnt trade them for anything..your running an aod so dont evenn think about 3.73's

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

02-26-2001, 02:23 AM	#1
andrewgarland Registered Member Join Date: Nov 2000 Location: El Monte, CA, USA Posts: 34	3:73 or 4:10? AOD stock '95 GT So what'll it be? 3:73's, or 4:10's? I'm gonna get the B&M shift kit too... Thanks guys! Andy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
60K Stock 96 GT Need More Power	elsoloscuro	Modular Madness	7	08-27-2003 02:54 PM
Stock 93 gt heads...	vheflin	Windsor Power	3	04-12-2002 05:28 PM
Stock RWHP on 94 GT?	Whoapony94	Windsor Power	11	04-08-2002 03:15 PM
Help!! Need 2000 Mustang GT Stock Rims, QUICK	GTGrl00	Blue Oval Lounge	5	07-27-2001 09:22 PM
How Much Should A Stock 88 5.0 GT Weigh?	BowTie Eater 5 Liter	Windsor Power	3	05-29-2001 09:53 PM

02-26-2001, 02:34 AM	#2
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Well i vote the 4.10's i doubt you'll regret it, and im sure about 99% of everyone here will agree. good luck specially cuz you have an sn95 style, which is not the lightest of the stangs. ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 97.80 Best 60': 2.0047 next mods: subframes, mac h-pipe

02-26-2001, 02:39 AM	#3
85muffstang Registered Member Join Date: Feb 2001 Location: garden city, mi, u.s.a Posts: 6	I put the 3:73 in my ex 95 cobra. even though mine was a manual, I think you would enjoy the 4:10 better. you shouldnt have any issues with highway driving, and you will like the acceleration it gives you. I wished I had gotten the 4:10, trial and error LOL. ------------------ 85GT,auto/2400 stall,converted to carb. edelbrock 600, performer RPM, BBK equal length headers, mallory distr. and ignit., h-pipe, flows, 3:73, converting to five lug and installing 95 cobra rims.

02-26-2001, 11:25 AM	#4
Josh91 Registered Member Join Date: Nov 1998 Location: Salina, KS Posts: 83	Definitely get the 4.10. I have had both and the 4.10 are way better than the 3.73. Also, you are going to need a new computer chip to make the 4.10 AOD-E friendly. Several places burn them, I know Dallas Mustang does as well as others. As for shift kit, you may want to also consider the Transgo or the Baumann. They are the superior product compared to the B&M. ------------------ 1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, 4.10's, Steeda STB, for now... The Original GT-40P Tech Page

02-26-2001, 12:01 PM	#5
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	as long as you dont mind running at 3 grand when your only going 65 mph get the 4:10's If you want your motor to last a little longer get the 373's. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-26-2001, 12:26 PM	#6
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	if i had to do it over again i would definately get the 4.10's , your heavy beast really needs more gear than the 3.73's, why not some 4.30's ? just kiddin and about the shift kit, stay away from the B&M, its junk, i had it in mine before i got a rebuild and it sucked a$$ , they guy who rebuilt my tranny made a custom one for cheap and it is way superior to the B&M, go for the Transgo or Baumann like suggested before ------------------ 88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install

02-26-2001, 05:36 PM	#7
Josh91 Registered Member Join Date: Nov 1998 Location: Salina, KS Posts: 83	He will not turn 3K at 65. I turn 2800 at 70 and that is with a non-lockup converter. If it locked I would only turn 2600 or so. 4.10's all the way in an AOD-E. ------------------ 1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, 4.10's, Steeda STB, for now... The Original GT-40P Tech Page

02-27-2001, 12:24 PM	#8
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	4.10s def..without a doubt..i got them with my tremec and i wouldnt trade them for anything..your running an aod so dont evenn think about 3.73's ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..