Novi 2000 Install Question

DCON · 03-13-2001, 04:25 PM

I'm putting a Novi 2000 in my 90 GT, but I have motorsport valve covers and I don't have the oil fill tube, just a breather. What do I do with the hose that comes from the air filter cover that is supposed to connect to the oil fill tube?

What kind of spark plugs should I use? The motor is all stock.

[This message has been edited by DCON (edited 03-13-2001).]

go4it · 03-13-2001, 05:59 PM

You shouldn't need that hose since you have a open breather on your valve cover. The Vortech had the same setup and when I put a powerpipe on it didn't have a place to put the hose on. I left the hose loose with the filter on the end of it. It made the car better, cruising along at 60 and letting of of the gas it would jerk a little, it stopped that.

------------------
93GT, S-trim, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 30lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, 3 row alum.rad. MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.

03-13-2001, 04:25 PM	#1
DCON Registered Member Join Date: May 2000 Location: ABQ,NM Posts: 32	Novi 2000 Install Question I'm putting a Novi 2000 in my 90 GT, but I have motorsport valve covers and I don't have the oil fill tube, just a breather. What do I do with the hose that comes from the air filter cover that is supposed to connect to the oil fill tube? What kind of spark plugs should I use? The motor is all stock. [This message has been edited by DCON (edited 03-13-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I just Got a Novi 2000, what other stuff do I need, Please read, Thank U :)	RedCobra/95	Windsor Power	7	10-25-2002 11:30 AM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
A Question for 94-95 owners concerning 1.7RR INSTALL	SlowStang2	Windsor Power	6	09-22-2001 06:39 PM
NOVI 2000 kit: what all comes with it?	Capri306	Windsor Power	4	08-10-2001 05:15 PM
Cold starting problems after Novi 2000 install.	DCON	Windsor Power	1	04-10-2001 10:02 AM

03-13-2001, 05:59 PM	#2
go4it Registered Member Join Date: Sep 1998 Location: Wise,Va. Posts: 248	You shouldn't need that hose since you have a open breather on your valve cover. The Vortech had the same setup and when I put a powerpipe on it didn't have a place to put the hose on. I left the hose loose with the filter on the end of it. It made the car better, cruising along at 60 and letting of of the gas it would jerk a little, it stopped that. ------------------ 93GT, S-trim, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 30lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, 3 row alum.rad. MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.