Where Do I Buy This Tool?????

vande97 · 11-12-2001, 06:44 PM

i NEED TO BUY A VALVE SPRING COMPRESSOR, BUT NOT THE ONE THAT YOU NEED TO DO IT WITH THE HEADS OFF, I NEED THE ONE THAT YOU CAN DO WITH THE HEADS STILL ON!(not the clamp style kind) any idea where i can buy this or rent it maybe????

thanks in advance

Idhomustang · 11-12-2001, 08:26 PM

You, buy the tool from any snap-on or mac tool dealer, Sear might even care it.. Good luck.. Mac

chris91LX · 11-12-2001, 09:06 PM

I don't know if you have them out there but Autozone or Pep Boys have always had what I needed, and I can usually rent the tool for free.

robertwigton · 11-13-2001, 05:36 AM

Sears does have the tool your looling for.Its like a repakaged
K-D,I have used mine for years with out any problems...

11-12-2001, 06:44 PM	#1
vande97 Registered Member Join Date: Jan 2001 Location: okemos Posts: 205	Where Do I Buy This Tool????? i NEED TO BUY A VALVE SPRING COMPRESSOR, BUT NOT THE ONE THAT YOU NEED TO DO IT WITH THE HEADS OFF, I NEED THE ONE THAT YOU CAN DO WITH THE HEADS STILL ON!(not the clamp style kind) any idea where i can buy this or rent it maybe???? thanks in advance

11-12-2001, 08:26 PM	#2
Idhomustang Registered Member Join Date: Sep 1999 Location: boise,idaho Posts: 220	56571 You, buy the tool from any snap-on or mac tool dealer, Sear might even care it.. Good luck.. Mac __________________ 393,9.5" 351W,830 Holley,Victor Jr,Home made Cool Air Pan, Pro Billet MSD, MSD 6AL, XE 284H Xtr-Com cam, 240-246 @.050, 540-544, M/T Et streets, Mac Upper and Lower, Control Arms, 3:73 US Gear,Mini Spool, Eagle Long rods, Mac Windage tray, KB Pistons, Scat crank, 4000 rpm stall convertor, C-4 trans, Airflow Research 185cc, Hooker long tubes 3", exhaust, S&W 6 point roll cage, 11.2 at 121 mph.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
code 1518 on the scan tool	mellow98cobra	Modular Madness	0	05-15-2003 01:58 PM
6pt. and 12 pt.? Tool question.	95mustanggt	Blue Oval Lounge	22	05-17-2002 01:35 PM
Tool or Staind?	TJR	Blue Oval Lounge	25	05-19-2001 04:01 PM
Reading Computer Codes-what tool??	Stang_ROTY	Windsor Power	2	05-05-2001 02:48 AM
Front Main Removal / Installation Tool	John93GT	Windsor Power	1	01-17-2001 11:39 AM

11-12-2001, 09:06 PM	#3
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	I don't know if you have them out there but Autozone or Pep Boys have always had what I needed, and I can usually rent the tool for free.

11-13-2001, 05:36 AM	#4
robertwigton Registered Member Join Date: Oct 2001 Location: orlando,fl USA Posts: 44	Sears does have the tool your looling for.Its like a repakaged K-D,I have used mine for years with out any problems...