MSD BTM or EEC-Tuner

Tony91LX · 11-15-2001, 07:28 PM

I am reworking my combo to 351W with a procharger, can the ECC-Tuner perform the same function as the BTM?

I like all the other features that the EEC-Tuner can provide, who has one, how do you like it.

Thanks

LOWKEY · 11-17-2001, 01:03 AM

Yes and No

The EEC Tuner doesn't have a boost sensitive input since it uses only the stock sensors. You can however map your own timing curve to match the boost output of your supercharger.

I run a strong curve up to about 3500rpm then slowly drop it down to around 20 degrees or so on pump gas. I run a btm too, just to have that adustability on the fly in case of bad weather or gas. I don't entirely trust btm's, I seen several friends blow head gasket after head gasket until they figured out the btm was bad.

All in all I have been very happy with the tuner. The software could be a little better, it needs a graphical interface. I'm currently working on one. The "tweecer" looks good too, it looks like the same exact thing with better software.

http://www.eec-tuner.com
http://www.tweecer.com

Brad

11-15-2001, 07:28 PM	#1
Tony91LX Registered Member Join Date: Jan 2000 Location: Feeding Hills, MA Posts: 114	MSD BTM or EEC-Tuner I am reworking my combo to 351W with a procharger, can the ECC-Tuner perform the same function as the BTM? I like all the other features that the EEC-Tuner can provide, who has one, how do you like it. Thanks

11-17-2001, 01:03 AM	#2
LOWKEY Registered Member Join Date: Jan 2000 Location: greenvile, NC Posts: 161	Yes and No The EEC Tuner doesn't have a boost sensitive input since it uses only the stock sensors. You can however map your own timing curve to match the boost output of your supercharger. I run a strong curve up to about 3500rpm then slowly drop it down to around 20 degrees or so on pump gas. I run a btm too, just to have that adustability on the fly in case of bad weather or gas. I don't entirely trust btm's, I seen several friends blow head gasket after head gasket until they figured out the btm was bad. All in all I have been very happy with the tuner. The software could be a little better, it needs a graphical interface. I'm currently working on one. The "tweecer" looks good too, it looks like the same exact thing with better software. http://www.eec-tuner.com http://www.tweecer.com Brad __________________ 89' Notch Stroked Poked & BLOWN low 11's and it goes around corners too Parts for Sale!! http://www.lowkey.stangnet.com/catalog.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
98 cobra tuner	stanger9219	Modular Madness	1	09-21-2004 02:38 PM
Diablo Sport Predator Tuner	sleeper_stang_2000	Modular Madness	2	09-19-2003 11:28 AM
Can Anyone Get Me In Touch With Mike Wesley...need Help With Eec Tuner	95supercoupe	Blue Oval Lounge	8	05-03-2002 01:00 PM
Please help....Need help with EEC Tuner...Trying to get intouch with M.Wesley..	95supercoupe	Small Ponies	0	04-22-2002 04:56 PM
EEC Tuner	PatrickMx	Windsor Power	5	01-18-2002 04:49 PM