I Need Help

thejman · 09-14-2005, 12:31 AM

i just bought a 84 gt with rear end noise and i need to know which rearend came in the 84. If it is an 8.8 will stuff out of a new 8.8 work cause everything say 86-93 for the 8.8 PLEASE HELP

Ieatcamaros · 09-14-2005, 05:37 AM

The 7.5 rear end came in that car. An 8.8 housing will bolt up. Got to do some brake line switching, I think. What's the noise?

87prjctpony · 09-14-2005, 09:13 PM

If It Sounds Like A Winding Noise Its Inside The Differential Case!! I Whent To The Junk Yard To Get An Axle To Install My 3.73's In It And I Put It On The Car Just Before I Installed The Ring And Pinion And There Was A Noise Pretty Loud When I Was On The Highway! I Would Give It A Little Gas And Let Go And It Would Start Hetting Louder. I Would Go To The Junk Yard And Find Yourself An 86-93 Mustang 5.0 And Take That Axle!

~The Jester~ · 09-15-2005, 01:56 AM

Camaro Muncher is 137% right, that's a 7.5 IF IT'S FACTORY.

WHINING is ring/pinion problem. CLUNK is bearing/u-joint problem.

09-14-2005, 12:31 AM	#1
thejman Registered Member Join Date: Sep 2005 Location: birmingham,AL Posts: 20	I Need Help i just bought a 84 gt with rear end noise and i need to know which rearend came in the 84. If it is an 8.8 will stuff out of a new 8.8 work cause everything say 86-93 for the 8.8 PLEASE HELP

09-14-2005, 05:37 AM	#2
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Re: I Need Help The 7.5 rear end came in that car. An 8.8 housing will bolt up. Got to do some brake line switching, I think. What's the noise? __________________ The sig says it all.

09-14-2005, 09:13 PM	#3
87prjctpony 87prjctpony Join Date: Aug 2005 Location: seaside ca Posts: 57	Re: I Need Help If It Sounds Like A Winding Noise Its Inside The Differential Case!! I Whent To The Junk Yard To Get An Axle To Install My 3.73's In It And I Put It On The Car Just Before I Installed The Ring And Pinion And There Was A Noise Pretty Loud When I Was On The Highway! I Would Give It A Little Gas And Let Go And It Would Start Hetting Louder. I Would Go To The Junk Yard And Find Yourself An 86-93 Mustang 5.0 And Take That Axle! __________________ i have a 87 5.0 gt with mac shorty headers, off-road h-pipe, mac mufflers, transgo shift kit, msd blaster coil, and 3.73 gears. o yeah aod tranny.

09-15-2005, 01:56 AM	#4
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: I Need Help Camaro Muncher is 137% right, that's a 7.5 IF IT'S FACTORY. WHINING is ring/pinion problem. CLUNK is bearing/u-joint problem. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....