© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-28-2002, 09:45 PM | #1 |
Registered Member
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
|
x-pipe help!!
i ordered an off-road x-pipe but was sent the wrong one. I was sent one with cats. Is there a difference in performance? I know the one with cats is a lot more expensive, but i wanna get the most performance out of one. What about sound....whats the differnce. Please help, i dont know whether to send it back or not
__________________
1990 lx 5.0L 5 spd. BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/ pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys 1997 Chevy Silverado Z71 4x4 6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges |
10-28-2002, 10:45 PM | #2 |
Registered Member
Join Date: Mar 2000
Location: Stroudsburg, PA, USA
Posts: 150
|
Hey dude I would send it back and get what you ordered. Yes there is a difference in performance and a difference in sound. With the cats on the flow is more restricted and it is quieter.
__________________
88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears |
10-28-2002, 10:53 PM | #3 |
Registered Member
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
|
what about gutting the cats? will that give it the same sound as an off-road?
__________________
1990 lx 5.0L 5 spd. BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/ pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys 1997 Chevy Silverado Z71 4x4 6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges |
10-28-2002, 10:55 PM | #4 |
Registered Member
Join Date: Mar 2000
Location: Stroudsburg, PA, USA
Posts: 150
|
I am not sure but I would just send it back and get the right pipe.
It's worth the wait.
__________________
88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears |
10-28-2002, 11:10 PM | #5 |
Registered Member
Join Date: Jun 2002
Location: Massachusetts
Posts: 157
|
I would sell the pipe on ebay or something to make myself some $$. Then I would just order another off-road with probably less than half of the money you could make selling the 2 cat pipe.
__________________
1991 Mustang GT Conv: 58,000 original miles, 2nd owner. Engine: FMS 65mm tb/spacer, C&L 73mm maf, MAC cai. Drivetrain: Built AOD w/ Edge 2800rpm lockup converter, hardened 3-4 inner shaft, Trans-Go shift kit, B&M supercooler, FMS 3.73 gears & aluminum d/s, rebuilt traction lock. Exhaust: BBK unequal length shorty headers, BBK o/r h-pipe, Flowmaster 2 chamber mufflers. Chassis/suspension/brakes: Kenny Brown supersubs. The rest is stock. |
10-29-2002, 09:20 AM | #6 |
Registered Member
Join Date: May 1999
Location: Hialeah,Fl,USA
Posts: 57
|
yeahhh!! that's the way to do it.
__________________
93 Lx coupe,125 shots wet system,BBK headers,pully,ported performer intake,24 lbs,short belt,Headman x pipe,mac catback,upr blue thunder shifter,73 mm mass air,k&n panel filter,king cobra cluth, aluminum driveshaft, 4.10 gears, cobra tranny, welds 15/6 on front and 15/10 rear. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
h pipe or x pipe, and which ones | apowers2k | Modular Madness | 3 | 02-10-2003 12:09 PM |
bbk unequals and stock H pipe :( | scale | Windsor Power | 4 | 06-14-2002 11:41 AM |
California Smog legal X or H pipe | shawv | Modular Madness | 1 | 05-08-2002 05:51 PM |
Off road pipe vs. Catalitic Pipe | Kamaro Killer | Windsor Power | 7 | 04-04-2002 04:05 AM |
Mac H pipe w cats vs BBK x pipe with cats?? | Chevyguy | Windsor Power | 15 | 11-16-2001 08:34 AM |