MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-24-2003, 08:53 AM   #1
Phantom5oh
Registered Member
 
Phantom5oh's Avatar
 
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
Question Adjustable Clutch Quad

I'm looking to get a firewall adjustable clutch quadrant and cable for my 95 GTS. Who makes the best one?

I'm also looking to replace the stock clutch. Who makes the best clutch with stock pedal pressure? The GTS is my daily driver and sees at least 2 hours of stop and go traffic every day. So I don't want a heck of a lot of extra pedal effort if I don't need it. What does everyone think?
__________________
95 GTS
03 DR 650SE

Sgarzi's Machine Works
Phantom5oh is offline   Reply With Quote
Old 01-24-2003, 09:16 AM   #2
Mustang_289
Registered Member
 
Join Date: Sep 2001
Posts: 512
Default

We've got the Steeda firewall adjuster and quandrant under the dash, it's great. Also got the CenterForce Dual-Friction great clutch - pedal not too hard. Can't say if it's like a stock clutch as our car didn't really run when we got it.
Mustang_289 is offline   Reply With Quote
Old 01-24-2003, 09:25 AM   #3
86GT
Sniffed too much n20
 
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
Default

I've got the UPR Billet Firewall Adjuster, Quadrant and cable kit. I love it. It has a lock ring on the adjuster so that it doesn't back off, and the quadrant has 3 positions available in it. I really like this setup, its worked well at the strip too.

As for clutch, it depends on your setup. I've ran the H/D ford setup, liked it, lasted quite a long time, a little harder than stock, but very liveable.

The easiest pedal effort clutch I've ran is the Ford King Cobra, its really the H/D with a different spring rate in the pressure plate (That's what I was told, someone correct me if I'm wrong) that causes it to have a a lighter pedal. It works really well too.

The D/F Centerforce is probably one of the best stock type (diaphragm) clutches, but it does have a bit more pedal effort than the H/D ford clutch, and its a really aggressive street/strip clutch so if you have a stock motor, its not the best one to get.

Take a look at Hayes or Ram too, they offer some great clutch setups, I can't tell you anything about them as I haven't tried one yet.

Hope that helps.
__________________
2002 Windsor Weekend
Q16 Qualifier
86GT is offline   Reply With Quote
Old 01-24-2003, 09:45 AM   #4
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

I had a King Cobra clutch and hated it, I went to a Ford racing clutch and love it, it has stock pedal pressure and is just $159.00 in Summit.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 01-24-2003, 12:18 PM   #5
Phantom5oh
Registered Member
 
Phantom5oh's Avatar
 
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
Default

Thanks, has anyone tried either the Centerforce 1 or 2? They are in the $175 range and right now my car is stock so I can't see spending $350 for the Dual Friction if I don't need it. I plan on adding more power when I get enough money saved. But I would rather have a streetable clutch for now.

I had a Ram in my '83 at one time. I can't say that I had good luck with it. I replaced it twice and it always chattered and was very unpredictable. I don't think I will ever buy another one.
__________________
95 GTS
03 DR 650SE

Sgarzi's Machine Works
Phantom5oh is offline   Reply With Quote
Old 01-24-2003, 01:33 PM   #6
86GT
Sniffed too much n20
 
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
Default

My brother's car had the Centerforce 2, and he's had a Valeo in it. Both were great, but the Centerforce 2 lasted longer. Its a good clutch, and $175 doesn't sound too bad for it.
__________________
2002 Windsor Weekend
Q16 Qualifier
86GT is offline   Reply With Quote
Old 01-25-2003, 10:25 AM   #7
jetuomi
Registered Member
 
jetuomi's Avatar
 
Join Date: Dec 2000
Location: Waterloo, ON, Canada
Posts: 214
Default

Spec Stage 1.. Stock pedal feel, can handle lots of torque..
I'm buying their stage1 clutch and billet flywheel soon, and have heard nothing but good results from them..
__________________
1994 GT (black on black)
A few mods, click below to check out the car...
My CAR
jetuomi is offline   Reply With Quote
Old 01-25-2003, 03:29 PM   #8
Phantom5oh
Registered Member
 
Phantom5oh's Avatar
 
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
Default

How much do the SPEC Clutches go for?
__________________
95 GTS
03 DR 650SE

Sgarzi's Machine Works
Phantom5oh is offline   Reply With Quote
Old 01-26-2003, 04:44 PM   #9
jetuomi
Registered Member
 
jetuomi's Avatar
 
Join Date: Dec 2000
Location: Waterloo, ON, Canada
Posts: 214
Default

Hey, call Spec directly, they might have them cheaper, but they are $189 or less..

http://www.speclutches.com/
__________________
1994 GT (black on black)
A few mods, click below to check out the car...
My CAR
jetuomi is offline   Reply With Quote
Old 01-26-2003, 07:58 PM   #10
Scrapla
Registered Member
 
Scrapla's Avatar
 
Join Date: Apr 2002
Location: Florida
Posts: 532
Default

I'm running the BBk adjustable quad. and a king cobra clutch and mines a daily and I love the combo.
__________________
90gt 347 and some bolt ons :-)


RICE HATERS MEMBER #73
Scrapla is offline   Reply With Quote
Old 04-23-2007, 10:50 AM   #11
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Re: Adjustable Clutch Quad

I have a spec stage 1 in my car, pedal feel and grab is great, but we had to grind several places in the bellhousing to clear the pressure plate, wasn't that big a deal, but it did hit in about 4 spots and one took a good bit of grinding.
I've also heard the spec pp is heavy and hard on your tranny but I read that online so???????
My .02
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 04-23-2007, 11:59 AM   #12
1989GT
Registered Member
 
1989GT's Avatar
 
Join Date: Apr 1999
Location: Cincinnati,OH
Posts: 1,511
Default Re: Adjustable Clutch Quad

Man this post is over 4 years old!
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. *Sold*

00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's.
My Car Domain Page
1989GT is offline   Reply With Quote
Old 04-25-2007, 01:05 AM   #13
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Re: Adjustable Clutch Quad

Yeah, didn't notice till I had posted.
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
adjustable clutch cable Ieatcamaros Windsor Power 4 10-24-2003 02:01 PM
new quad and clutch cable stock89 Windsor Power 2 02-15-2003 12:25 AM
Help with adjustable clutch cable Rebel79 Windsor Power 6 04-20-2002 03:54 AM
adjustable clutch 88gtstang Windsor Power 6 05-22-2001 05:50 AM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long) beefcake Blue Oval Lounge 2 02-23-2001 03:05 PM


All times are GMT -5. The time now is 02:31 AM.


SEARCH