![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Feb 2002
Location: Arlington, Washington
Posts: 92
|
![]() So, I had to take my engine apart to get the threads in the snout of my crank repaired and I am putting it back together with new rings. I took the whole engine apart. Which hone should I use to freshen up the cylinder walls. I can still see the crosshatch from the last rebuild as I only have about 15 or 16k miles on it. I have been told that the stone hone is a little more abrasive at 220 or 280 grit and that a ball hone would be better suited for refreshening. I found a flex hone at Napa.com but it is stated as 120 grit. I assume the flex hone is the same as the ball hone. If so what is it with the grit rating? To me, the stones are less abrasive as noted by their grit rating. Their is a big price difference between the stones and the flex hone. Feedback is greatly appreciated.
__________________
Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust, |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Sep 1998
Location: Oviedo, FL
Posts: 992
|
![]() Just get the "dingle ball" hone and clean it up. Knock off the glaze on the cyl. walls.
__________________
"Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic |
![]() |
![]() |
![]() |
#3 |
Sober voice of Reason
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
|
![]() You can use the stone hone and buy 400 grit stones (at least you can around here) or even cover the stones with 400 grit wet/dry paper.
__________________
393W: AFR 205's, hydraulic roller, TKO600. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
A-arm bushings and Ball joints | glxstang | Windsor Power | 3 | 07-22-2002 01:22 PM |
Ball Joints | gray ghost86 | Windsor Power | 4 | 06-06-2002 11:08 AM |
separating ball joints and tie rod ends...best way? | 82 GT | Windsor Power | 8 | 02-22-2002 03:56 PM |
putting 94-95 ball joints on to 89 a-arms | John Cummins | Windsor Power | 0 | 06-18-2001 07:28 PM |
Fun with ball joints | Chevyguy | Windsor Power | 3 | 05-15-2001 08:16 AM |