© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-08-2001, 10:48 AM | #1 |
Registered Member
Join Date: Dec 2000
Posts: 168
|
Oil and Water....
Why does it look like the oil level has risen? almost looks like there is coolant in the oil, but no bubbles, smoke, and not milky. Mechanic told me the system held pressure for a few hours, they left the "machine" hooked up and no leaks were found. Is this a bad head gasket?
|
05-08-2001, 10:58 AM | #2 |
Registered Member
Join Date: Mar 1999
Location: seattle
Posts: 76
|
you wont find any smoke or that other stuff if you caught it real early if your oil is going up there is definately something wrong. does it run warmer?
|
05-08-2001, 06:59 PM | #3 |
Registered Member
Join Date: Dec 2000
Posts: 168
|
The engine definitely FEELS warmer, but it does not overheat or anything. The stock gauge (NORMAL) is around the "OR" with a 180* thermostst. I don't 'seem' to be loosing coolant. On the oil dipstick, it looks like the fluid level is about an inch? over the full hot mark. I change the oil and know I left it just under the full notch. Is this a head gasket going?
|
05-09-2001, 12:33 AM | #4 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
yes it sounds like a head gasket, mine did the same thing, what i'd do is let it sit for a day or so, then take out one of your oil drain plugs, if theres coolant in there, thats what will run out first, (letting it sit will let the oil and coolant separate) when mine went bad i pulled the plug and about 4 quarts of coolant came out before i saw any oil at all, needless to say i was shocked, and pissed at the same time, try this and let us know
------------------ 88 Notchback 5.0, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rockers,intake or ported heads |
05-09-2001, 08:36 AM | #5 |
Registered Member
Join Date: Dec 2000
Posts: 168
|
The oil needs to be changed anyway, car is in the shop now so have to wait to get it back. How long do I have before I get the milky oil/smoke/etc - MAJOR problems? it may be a week or two before I can do (financially) anything with the engine.
So if it turns out to be the gasket, how bad is the change? It looks pretty straight forward, but having never done one...Can I do it for a hundred bucks (or ext. warranty will + $100 deductible)? Man, if these problems keep up, I may not be able to DRIVE to the poor house, and will have to hitchhike! |
|
|