MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-29-2012, 05:29 PM   #1
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default I'm back

Well, car died in july of 2010 after looking for electrical gremlin since engine rebuild in 2007. I've been so frustrated about it I havent even messed with it for a year and a half!! But this car is my baby(like er body elses' is to them, especially mustangs) so I finally had it towed to the best ford guy in town, $150 and a new computer later and we're all good!!

Besides getting married and having kids, last sunday was the happiest day of my life!! Right up there with getting the car new, and the first time the new motor fired!!

I have never sprayed the new motor because it's got that chip in it and the tuner told me that he'd have to put another tune for nitrous on the chip and I'd be able to switch back and forth. Although I know that's the best way to get the most out of the gas I couldn't resist pulling the chip out (at first I thought there was no chip, just reprogrammed CPU) retarded timing 3 degrees popped in the 75hp jets and...........

The nitrous solenoid is dead
More to come....
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 02-06-2012, 07:48 PM   #2
StangFlyer
Founder
 
StangFlyer's Avatar
 
Join Date: Jun 1995
Location: Michigan
Posts: 19,326
Default Re: I'm back

Welcome back. Let's hear how it goes with the spray...
__________________
StangFlyer
1991 Mustang GT - Supercharged 377 Stroker
2000 Ford Lightning - Project Lightning Hauler
Media Center Gallery - View my member photos
StangFlyer is offline   Reply With Quote
Old 02-19-2012, 07:47 PM   #3
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Re: I'm back

Ok, System is fine, WOT switch had been bumped so the throttle

linkage wasn't hitting it, I'm spraying what amounts to a 62 shot

(according to online calculator), with the chip in, no timing retard.

No detonation and it pulls like the 113 shot with no chip and 9

degrees of timing, maybe more!

So now, of course I want more, I know nothing about custom chips

first of all, so can I retard the timing and spray more with the chip

in? Seems the tuner told me not to cause the tune is lean now to

get as much HP as possable and the chip will put timing back to

where chip has it set, therefore castastrophic results, correct?

Don't want to spray more than 50-60 shot without retarding timing 2

degrees per 50hp right? So will the chip put timing back that fast or

do I have to pull the chip if I want to spray more? Anyone ever got

a nitrous tune? Worth it? I paid $450 for the tune and chip and it's

$250 to add up to 4 different tunes, I guess there's a wire and

switch run to passenger compartment to choose between tunes? No

way you gotta pull CPU out to flip switch every time.

Thanks guys any help appreceiated, sorry so long again.
W Kennington.

PS Damn I love my Mustang!!
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 06-16-2012, 05:12 PM   #4
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Question Re: I'm back

Blew a head gasket between 5 and 6! (unhappy)

So turns out I used the cheap fel pro's??
So I'm putting Cometic's on it, I'm fighting the urge to put another cam in it as the TF #1 is VERY streetable, thats what I want but it still falls on it's face at 5300-5400rpm, like the stock cam did at 5000

Any advice on a cam for my engine? (details in sig)
I like the trick flow, so I'm thinking about they're #2 cam.
#1= 221/225 @.050 .499/.510 with 1.6
#2= 224/232 "" .542/.563 ''''
both at 112 seperation

How much driveability you guys think I'll lose?
Any help appriecated!!
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Back mustangman65_79 Blue Oval Lounge 10 08-08-2006 06:08 PM
Leakage on back-seat floor and behind back-seat on '99 Convertible? mvip Small Ponies 1 03-13-2006 08:45 PM
Its Back BowTie Eater 5 Liter Blue Oval Lounge 12 07-17-2002 12:37 AM
Guess Who's Back? Back Again... *Steeda90GT* Blue Oval Lounge 14 07-11-2002 04:39 PM
Edelbrock cat-back or Mac cat-back? 95 King GT Windsor Power 1 07-21-2001 09:18 AM


All times are GMT -5. The time now is 04:49 AM.


SEARCH