Head porting?

86StangGT · 01-15-2001, 04:51 PM

Anyone know of any good websites that show you how to port your own heads and get the materials needed? Any advice will be appreciated.

shovelnose · 01-15-2001, 05:04 PM

Quote:

Originally posted by 86StangGT:
Anyone know of any good websites that show you how to port your own heads and get the materials needed? Any advice will be appreciated.

http://www.fordmuscle.com/archives/2...ng/index.shtml

Try that. Should help.

http://www.fordmuscle.com/archives/2...s/index1.shtml

Some flow #'s
------------------
82 Mercury Capri 302.
Comp. Cams
Tremec 3550
3.73's
12.8@106 N/AKevin's Capri

[This message has been edited by shovelnose (edited 01-15-2001).]

MOUSETRAP · 01-16-2001, 10:56 PM

Here is a great site with some of the best looking ported stock heads i have seen. Just e-mail him, he is very nice and informative and will answer any question you can ask.
Jarrod http://hometown.aol.com/newt56k/myhomepage/auto.html
http://hometown.aol.com/newt56k/myhomepage/auto.html
go down to the bottom and click on "pics of ported heads"

------------------
87GT Vortech S-trim, 155intank pump, 24# injectors, 75mm pro-m, cobra intake, exhaust, 3.73's, mega bite jr's, Central coastal mustangs drag springs and some other freebies.

Rick 91GT · 01-17-2001, 03:28 PM

GO to the standard abrasives web site they have a DYI-Do It Yourself article that is very good has nice clear wording and diagrams, and recomendations on what grit to use when and where

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

01-15-2001, 04:51 PM	#1
86StangGT Registered Member Join Date: Dec 2000 Location: slidell, La Posts: 73	Head porting? Anyone know of any good websites that show you how to port your own heads and get the materials needed? Any advice will be appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Head porting	GerryGT	Modular Madness	3	11-18-2003 06:18 PM
4.6 DOHC Head porting	Nitrous Al	Modular Madness	7	03-15-2003 11:23 PM
Head Porting...	Phantom5oh	Windsor Power	10	08-14-2001 01:22 PM
Head Porting ???	Fostang	Windsor Power	1	07-15-2001 05:46 AM
Cylinder Head Porting	Gearhead999	Classic Mustangs	5	01-21-2001 01:13 PM

01-16-2001, 10:56 PM	#3
MOUSETRAP Registered Member Join Date: Jan 2001 Location: sandston, va. Posts: 12	Here is a great site with some of the best looking ported stock heads i have seen. Just e-mail him, he is very nice and informative and will answer any question you can ask. Jarrod http://hometown.aol.com/newt56k/myhomepage/auto.html http://hometown.aol.com/newt56k/myhomepage/auto.html go down to the bottom and click on "pics of ported heads" ------------------ 87GT Vortech S-trim, 155intank pump, 24# injectors, 75mm pro-m, cobra intake, exhaust, 3.73's, mega bite jr's, Central coastal mustangs drag springs and some other freebies.

01-17-2001, 03:28 PM	#4
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	GO to the standard abrasives web site they have a DYI-Do It Yourself article that is very good has nice clear wording and diagrams, and recomendations on what grit to use when and where ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98