FP while cruising?

stangGT95 · 04-24-2004, 09:39 AM

What should FP be when doing 60mph? I get a reading of 44-45psi. Does that seem high for part-throttle?

GhOsT6_9 · 04-24-2004, 01:38 PM

What's your FP set at for at idle??

I know when i'm doin about 60MPH @ ~2000RPM the FP is about 38 psi (36psi at idle)

stangGT95 · 04-24-2004, 03:23 PM

It is a stock FPR, so I thought it'd be 38 at idle w/ hose off. Anyway I get a reading of 32psi when first started, then 38psi when first start to drive down the street.

04-24-2004, 09:39 AM	#1
stangGT95 Registered Member Join Date: Jun 2003 Location: Novinger, Mo Posts: 72	FP while cruising? What should FP be when doing 60mph? I get a reading of 44-45psi. Does that seem high for part-throttle? __________________ 95 GT w/ AODE and Transgo Shift kit, trans cooler, SpeedCal, KB 1.5 Flowzilla w/ 6# pulley, MAC chrome CAI, chrome radiator hoses, stock MAF w/ center post removed, 70mm PP TB, electrical boost & FP gauges, digital A/F gauge, 1 5/8" unequal headers, 2 1/2" ProChamber h-pipe, Borla catback exhaust, and 3.55's. Cobra RR hood, Saleen double wing, Xenon body kit, chrome Cobra R wheels 17X8 in front and 17X10.5 in the back.

04-24-2004, 01:38 PM	#2
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	What's your FP set at for at idle?? I know when i'm doin about 60MPH @ ~2000RPM the FP is about 38 psi (36psi at idle) __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

04-24-2004, 03:23 PM	#3
stangGT95 Registered Member Join Date: Jun 2003 Location: Novinger, Mo Posts: 72	It is a stock FPR, so I thought it'd be 38 at idle w/ hose off. Anyway I get a reading of 32psi when first started, then 38psi when first start to drive down the street. __________________ 95 GT w/ AODE and Transgo Shift kit, trans cooler, SpeedCal, KB 1.5 Flowzilla w/ 6# pulley, MAC chrome CAI, chrome radiator hoses, stock MAF w/ center post removed, 70mm PP TB, electrical boost & FP gauges, digital A/F gauge, 1 5/8" unequal headers, 2 1/2" ProChamber h-pipe, Borla catback exhaust, and 3.55's. Cobra RR hood, Saleen double wing, Xenon body kit, chrome Cobra R wheels 17X8 in front and 17X10.5 in the back.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cruising in San Diego	MustangTzahui	Ford Show & Go	0	12-15-2002 09:30 PM
Mixture seems to lean out while cruising but not acceleration/decel and idle	crazypete	Windsor Power	2	12-12-2002 12:24 PM
Edmontonian Cruising Club	RoadWarrior	Ford Show & Go	0	03-13-2002 11:04 AM