what do you think my time will be

Mont · 01-25-2001, 07:33 PM

I haven't raced my car with this set up yet, I'm in Utah so the elevation is about 4700 feet above sea level. I will be on slicks. Thanks everyone...

------------------
89 LX Supercharged DSS 357, 11 lbs Powerdyne, Downs Box intake, ported GT-40x heads, lockwired, Crane Cam 1.6 rockers, Crower cam, Oil cooler, Moroso oil evac kit, Taylor 10mm wires, MAC 70mm T/B, 30lb injectors, Vortech fuel rails, Pro M 75mm Mass air, Vortech T-Rex Fuel pump, 255lph intank pump, K&N, Cobra R radiator MSD6-BTM, Lakewood bellhousing, Tremec Trans, Pro 5.0 shifter, MAC headers and X-pipe, Dynomax race mufflers. Dyno at 556hp to the wheels.

91blownpony · 01-25-2001, 09:05 PM

YOU SHOULD EASYLY BE IN THE 11'S, WITHOUT A DOUBT!

91blownpony · 01-25-2001, 09:06 PM

I TAKE IT BACK 9'S OR 10'S!!!!!!!!!!!!!

fiveohpatrol · 01-25-2001, 10:28 PM

well if you can hook without breaking anything that hp to the wheels should get you easily low 10's or high 9's

------------------
88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install

01-25-2001, 07:33 PM	#1
Mont Registered Member Join Date: Aug 2000 Location: Bountiful, UT Posts: 91	what do you think my time will be I haven't raced my car with this set up yet, I'm in Utah so the elevation is about 4700 feet above sea level. I will be on slicks. Thanks everyone... ------------------ 89 LX Supercharged DSS 357, 11 lbs Powerdyne, Downs Box intake, ported GT-40x heads, lockwired, Crane Cam 1.6 rockers, Crower cam, Oil cooler, Moroso oil evac kit, Taylor 10mm wires, MAC 70mm T/B, 30lb injectors, Vortech fuel rails, Pro M 75mm Mass air, Vortech T-Rex Fuel pump, 255lph intank pump, K&N, Cobra R radiator MSD6-BTM, Lakewood bellhousing, Tremec Trans, Pro 5.0 shifter, MAC headers and X-pipe, Dynomax race mufflers. Dyno at 556hp to the wheels.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My report from racing at the NMRA event in Bowling Green (was ATTN: Lt. Dan)	andy669	Racer's Club House	12	10-08-2003 02:41 PM
Towed away this time! (Long)	1988GTCONERTIBLE	Windsor Power	6	10-26-2001 06:05 PM
Turning over a new leaf. Time to be Jerk Damien!	Mercury	Blue Oval Lounge	24	10-25-2001 01:43 PM

01-25-2001, 09:05 PM	#2
91blownpony Registered Member Join Date: Jan 2001 Location: baltimore Posts: 12	YOU SHOULD EASYLY BE IN THE 11'S, WITHOUT A DOUBT!

01-25-2001, 09:06 PM	#3
91blownpony Registered Member Join Date: Jan 2001 Location: baltimore Posts: 12	I TAKE IT BACK 9'S OR 10'S!!!!!!!!!!!!!

01-25-2001, 10:28 PM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	well if you can hook without breaking anything that hp to the wheels should get you easily low 10's or high 9's ------------------ 88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install