Here are some new vid from Friday night on spray.

68Falcon · 07-29-2006, 07:29 PM

I had a pretty good night. It ran it's best time so far 11.33@116. I made four runs. The problem I had was my DCC 18" fan kit stop working. The controller took a crap after only a year. It happened on the first run. So I had to deal with pushing the car in the pits and staging lanes and running hot down the track. It sucked. Well here are the vids

1.87 60ft 7.53@95 1/8 11.83@116 1/4
http://media.putfile.com/7-28-06-Pass-1

1.54 60ft 7.16@96 1/8 11.33@116
http://media.putfile.com/7-28-06-pass-2

1.83 60ft 7.26@97 1/8 11.43@115
http://media.putfile.com/7-28-06-pass-3

1.59 60ft 7.20@96 1/8 11.38@116
http://media.putfile.com/7-28-06-pass-4

~The Jester~ · 07-30-2006, 07:21 AM

Video 2, right after the purge, did you turn on another fuel pump??? What am I hearing there?

Nice runs, by the way!!!

68Falcon · 07-30-2006, 10:29 AM

I run a mechanical fuel pump because it's a street car and I didn't want to here the electric fuel pump driving on the street. So I just have the pump for the Nitrous.

grey88gt · 07-31-2006, 10:05 PM

Thanks for the show, GREAT passes.

~The Jester~ · 08-01-2006, 03:25 PM

Quote:

Originally Posted by 68Falcon

I run a mechanical fuel pump because it's a street car and I didn't want to here the electric fuel pump driving on the street. So I just have the pump for the Nitrous.

I thought so. Sounds really good, and obviously RUNS pretty good too! I HAD two pumps (both electric) hooked up, now I just run a BG400 on the street and the strip. Was never a big fan of mechanical pumps, which one are you running if you don't mind me asking?

68Falcon · 08-01-2006, 03:49 PM

I have a carter super strip mechanical pump and a Aeromotive electric pump. I run a BG280 on my Falcon.

~The Jester~ · 08-01-2006, 04:21 PM

Dip tube with the mechanical, or out of the sump?

68Falcon · 08-03-2006, 05:44 PM

I made my own pick up tube.

~The Jester~ · 08-05-2006, 08:36 AM

Nice! I love the "build it yourself" stuff. I do that all the time.

1/2" fuel line up to the front to feed that beast?

Hope you don't mind me asking all these stupid questions!

68Falcon · 08-05-2006, 11:31 AM

No I have 3/8 line from front to back

82 GT · 08-18-2006, 11:39 PM

Those two smaller gauges next to your tach...are those your nitrous and fuel pressure gauges?
Nice passes! I makes me want to get my nitrous hooked up now!

68Falcon · 08-19-2006, 09:29 AM

No it's oil pressure and water temp. The fuel gauge is outside the car. The ones in the AC vent are trans temp and volts meter. The NOS gauge is on the bottle.

07-29-2006, 07:29 PM	#1
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Here are some new vid from Friday night on spray. I had a pretty good night. It ran it's best time so far 11.33@116. I made four runs. The problem I had was my DCC 18" fan kit stop working. The controller took a crap after only a year. It happened on the first run. So I had to deal with pushing the car in the pits and staging lanes and running hot down the track. It sucked. Well here are the vids 1.87 60ft 7.53@95 1/8 11.83@116 1/4 http://media.putfile.com/7-28-06-Pass-1 1.54 60ft 7.16@96 1/8 11.33@116 http://media.putfile.com/7-28-06-pass-2 1.83 60ft 7.26@97 1/8 11.43@115 http://media.putfile.com/7-28-06-pass-3 1.59 60ft 7.20@96 1/8 11.38@116 http://media.putfile.com/7-28-06-pass-4 __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

07-30-2006, 07:21 AM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Here are some new vid from Friday night on spray. Video 2, right after the purge, did you turn on another fuel pump??? What am I hearing there? Nice runs, by the way!!! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

07-30-2006, 10:29 AM	#3
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Here are some new vid from Friday night on spray. I run a mechanical fuel pump because it's a street car and I didn't want to here the electric fuel pump driving on the street. So I just have the pump for the Nitrous. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

07-31-2006, 10:05 PM	#4
grey88gt Registered Member Join Date: Feb 2004 Location: Skiatook, Oklahoma Posts: 193	Re: Here are some new vid from Friday night on spray. Thanks for the show, GREAT passes.

08-01-2006, 03:49 PM	#6
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Here are some new vid from Friday night on spray. I have a carter super strip mechanical pump and a Aeromotive electric pump. I run a BG280 on my Falcon. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

08-01-2006, 04:21 PM	#7
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Here are some new vid from Friday night on spray. Dip tube with the mechanical, or out of the sump? __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

08-03-2006, 05:44 PM	#8
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Here are some new vid from Friday night on spray. I made my own pick up tube. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

08-05-2006, 08:36 AM	#9
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Here are some new vid from Friday night on spray. Nice! I love the "build it yourself" stuff. I do that all the time. 1/2" fuel line up to the front to feed that beast? Hope you don't mind me asking all these stupid questions! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

08-05-2006, 11:31 AM	#10
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Here are some new vid from Friday night on spray. No I have 3/8 line from front to back __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

08-18-2006, 11:39 PM	#11
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: Here are some new vid from Friday night on spray. Those two smaller gauges next to your tach...are those your nitrous and fuel pressure gauges? Nice passes! I makes me want to get my nitrous hooked up now! __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

08-19-2006, 09:29 AM	#12
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Here are some new vid from Friday night on spray. No it's oil pressure and water temp. The fuel gauge is outside the car. The ones in the AC vent are trans temp and volts meter. The NOS gauge is on the bottle. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Friday night insight	Ty'97Cobra	Blue Oval Lounge	0	04-27-2004 04:07 PM
Results from date friday night and Rockingham last night!!!	Eric4Nitrous	Blue Oval Lounge	21	02-23-2003 07:06 PM
I Got Arrested Friday Night.	6T9PONY	Blue Oval Lounge	20	03-19-2002 04:42 AM
Cops out in FULL FORCE. Friday and Saturday night.	Mercury	Blue Oval Lounge	13	06-25-2001 04:50 PM
Friday Night Racing	Fostang	Stang Stories	3	06-11-2001 06:52 PM