BBK Intake and computer/injector question

mrpink · 06-15-2005, 06:58 AM

Guys, I am looking at the new BBK SSI intake for my car. I have a motor that was installed by the previous owner so I don't know the whole story. It's in an '89. It has cam, headers, GT40P heads, Ford/Crane roller rockers, Cobra intake. I have put on an Edlebrock 70mm TB and a Granatellie MAS for 19# injectors. Question: if I go with this intake and 24# injectors, do I have to change the computer or just the MAS? Will the computer adjust itself? Thanks,
Jim

blackEagle · 06-15-2005, 09:01 AM

Changing injectors requires a re-calibrated mas air or computer upgrade via a chip.

mrpink · 06-15-2005, 09:08 AM

Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

blackEagle · 06-15-2005, 11:00 AM

Quote:

Originally Posted by mrpink

Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

No changes to the EEC are needed with a properly calibrated MAF. There are articles here on EEC and MAF processing. Check them out as there is good info in them.

mrpink · 06-15-2005, 12:40 PM

Thanks for the help.

06-15-2005, 06:58 AM	#1
mrpink Registered Member Join Date: Aug 2003 Posts: 17	BBK Intake and computer/injector question Guys, I am looking at the new BBK SSI intake for my car. I have a motor that was installed by the previous owner so I don't know the whole story. It's in an '89. It has cam, headers, GT40P heads, Ford/Crane roller rockers, Cobra intake. I have put on an Edlebrock 70mm TB and a Granatellie MAS for 19# injectors. Question: if I go with this intake and 24# injectors, do I have to change the computer or just the MAS? Will the computer adjust itself? Thanks, Jim

06-15-2005, 09:01 AM	#2
blackEagle Registered Member Join Date: Mar 1999 Location: Calumet City, IL, USA Posts: 39	Re: BBK Intake and computer/injector question Changing injectors requires a re-calibrated mas air or computer upgrade via a chip. __________________ Larry Bosley 1995 Mustang GT(R.I.P.) 2002 GT

06-15-2005, 09:08 AM	#3
mrpink Registered Member Join Date: Aug 2003 Posts: 17	Re: BBK Intake and computer/injector question Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

06-15-2005, 12:40 PM	#5
mrpink Registered Member Join Date: Aug 2003 Posts: 17	Re: BBK Intake and computer/injector question Thanks for the help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM