© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-17-2001, 12:57 PM | #1 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
NOS 05115-stage one or two??
is the only diffrence between these 2 that stage two comes with a fuel pump?..my fuel system is allready sufficent..cant i buy stage one and jet it for 150shot?
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
01-17-2001, 04:40 PM | #2 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
The only difference is the fuel pump, the jets, and a shim in the nitrous regulator.
N2O Regulator 75 hp 42 59 150 hp 67 42 The shim is .040 and it goes in the reglator cap. Really easy. |
01-18-2001, 12:27 AM | #3 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
so is it better to buy stage and and get new jets and a diffrent shim or just buy stage 2 and try to sell the pump??
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
01-18-2001, 12:29 AM | #4 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
o and would those be the settings i would use for 24# injectors with a 150 shot??
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
01-18-2001, 01:29 AM | #5 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
I also had the stage 1 kit but wanted to upgrade without the fuel pump and stuff. I went to my local speed shop and they got me the jets from NOS for like 6 bucks.
As for the settings, I think that the stage 2 system is still set up for the 19's with allot of fuel pressure from the pump that comes with the kit. I had 30's and a 190 intank pump and ran with no problems. ------------------ blown347,free breathing heads and exhaust, solid roller cam, tremec,moser axles, 4.10's, role cage and all the other stuff. 11.8 @ 115 very untuned 1993lx5.0 AOD dailydriver |
01-18-2001, 05:01 AM | #6 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
Yeah, the jets are only like 3 bucks each, and you could make the .040 shim yourself out of sheet stock, or just order it when you get the jets.
I also don't believe that the shim is necessary when larger injectors are used. I don't use the shim. |
01-18-2001, 01:26 PM | #7 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
EXGM..what size injectors are you using??and what size shot are you running??BTW thanks for the help..hopefull when it is all said and done even mustang people wont know i got NOS in my car..if you care id tell you how im ganna do it..o yea..what times are you running and what mods you got
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
01-18-2001, 03:34 PM | #8 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
I am jetted for 100 rear wheel horsepower. So about a 125 shot.
Here is my combo: 302,TFS heads(mild port),E-303,1.72's,ported GT-40,24 lb'ers,65 mm t.b.,headers/exhaust,T-5, 3.73's, pulleys, c&l 73. motor 12.8 @ 111 spray 12.0 @ 122 Just on radials. |
01-18-2001, 04:54 PM | #9 |
Registered Member
Join Date: Feb 2000
Posts: 469
|
You say your fuel system is already sufficient, are you positive? You need to be absolutly sure of this before you jet it to 150...You need to check your fuel pressure at the test port and if it is below 80 psi at wot you will need the pump supplied in the stage 2 kit. I am not sure though how to set it up running 24# injetors though. Your best bet would be to call the tech support at NOS and find out. This isn't something you just want to try out...severe lean=death to motor.
------------------ My Mustang 91 LX Conv. 52,000 orig mi. Hurst shifter, 3.55 grs, NOS 150 dry kit, MSD 6al, MSD timing control, malory coil, pullies, fms adj fuel reg, BBK 70mm tb, Pro-m 75mm maf, battery in trunk, JBA shorties, JBA subs, JBA strut tower brc, dynomax "super turbo" 2 1/2 exhaust, FMS billit distrib, Hotchkis lower cntrl arms, MAC Fenderwell cold air kit, off road h pipe. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steeda G-Trac Stage '#' Systems? | Sonics2042 | Windsor Power | 2 | 09-05-2002 03:45 PM |
Tfs Stage 1 To X-303 Back To Tfs Stage 1 | ballistic_331LX | Windsor Power | 40 | 06-12-2002 09:04 AM |
1996 Cobra vs 2002 Stage 2 Roush | Milktasd | Stang Stories | 4 | 03-22-2002 12:31 AM |
TW stage 3 Cam anyone | REX331 | Windsor Power | 5 | 04-28-2001 07:42 PM |
Trans-go stage 3 firmness setting for aod? | Luke87GT | Windsor Power | 1 | 03-21-2001 08:49 AM |