A/C delete. Need tech info!

NoSlow5.0 · 01-13-2001, 09:07 AM

Any one know where i can find advice, instructions on how to delete my A/C? Replacing heater core and figured i'd lose the parasite. Light Em Up!!

01-13-2001, 10:15 AM

Use a 216 cm belt! And just remove your pump. You dont need a a/c delite kit! Rest of your post ....someone else?

------------------
-87 GT, K&N, 5-speed, Walker exhaust, no air silencer. timing
75000miles .
14,61 and 95,59mph
One of around 6000 stangs in sweden

NOS_Notch · 01-13-2001, 12:33 PM

Call "total performance" in clinton twp. MI.
They have the fms kit for about $35
it removes the a/c and relocates the powersteering up so the car is equipped like it never had it.
when you remove the smog pump, you have to remove the y-pipe off the back side of the heads and plug them(thermactor plugs $5/pr from ford)
if you go to an off-road h-pipe there is no tube to plug there otherwise you need to plug that on the h-pipe.
Then you can remove all the tubing from the a/c (spec. tool $8 from autozone)
You will then have as much room on the pass. side for changing spark plugs as the driver side...really cleans up the bay, alot more access area, and pick up some ponies too.
Heater core...never done it, get a chiltons
If you e-mail me i will give you the proper belt size....i think is 75 3/4"...not sure

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

LX XLR8R · 01-13-2001, 12:41 PM

the plugs for the back of the heads can be 5/8 bolts that you can get in the hardwear store for 89 cents and ive read on the internet somewhere that you can make your ac bracket into the one that moves the powersterring pump up top.

NoSlow5.0 · 01-13-2001, 06:13 PM

Thanks guys. Do i have to remove the smog equip to get the A/C out? Some instructions or pictures would help. I need to know what all has to be done so i don't miss something. Light Em Up!!

01-14-2001, 03:24 AM

Goto www.mustangofthemonth.com they have a article about removing the A/C.

Click on the link labeled OLD,then scroll down to the tech section.

------------------
Paxton Blown 87GT

[This message has been edited by Mustanguy (edited 01-14-2001).]

NoSlow5.0 · 01-14-2001, 09:50 AM

Thanks. That's perfect. Light Em Up!!!

01-13-2001, 09:07 AM	#1
NoSlow5.0 YOU HAVE NO MARBLES!!!!!! Join Date: Aug 2000 Location: Jonesboro,Georgia,USA (Providence, Ri) Posts: 868	A/C delete. Need tech info! Any one know where i can find advice, instructions on how to delete my A/C? Replacing heater core and figured i'd lose the parasite. Light Em Up!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine and generic tech info anyone?	Nixon1	Windsor Power	0	03-15-2003 01:06 PM
1996 GT info. needed??	ncbflo	Modular Madness	1	06-16-2001 11:39 PM
AOD tech... any good info?	91LXConv	Windsor Power	4	04-04-2001 10:25 AM
found a stang-need info	Will G	Windsor Power	15	02-20-2001 12:45 PM

01-13-2001, 10:15 AM	#2
joakim Guest Posts: n/a	Use a 216 cm belt! And just remove your pump. You dont need a a/c delite kit! Rest of your post ....someone else? ------------------ -87 GT, K&N, 5-speed, Walker exhaust, no air silencer. timing 75000miles . 14,61 and 95,59mph One of around 6000 stangs in sweden

01-13-2001, 12:33 PM	#3
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	Call "total performance" in clinton twp. MI. They have the fms kit for about $35 it removes the a/c and relocates the powersteering up so the car is equipped like it never had it. when you remove the smog pump, you have to remove the y-pipe off the back side of the heads and plug them(thermactor plugs $5/pr from ford) if you go to an off-road h-pipe there is no tube to plug there otherwise you need to plug that on the h-pipe. Then you can remove all the tubing from the a/c (spec. tool $8 from autozone) You will then have as much room on the pass. side for changing spark plugs as the driver side...really cleans up the bay, alot more access area, and pick up some ponies too. Heater core...never done it, get a chiltons If you e-mail me i will give you the proper belt size....i think is 75 3/4"...not sure ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com

01-13-2001, 12:41 PM	#4
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	the plugs for the back of the heads can be 5/8 bolts that you can get in the hardwear store for 89 cents and ive read on the internet somewhere that you can make your ac bracket into the one that moves the powersterring pump up top.

01-13-2001, 06:13 PM	#5
NoSlow5.0 YOU HAVE NO MARBLES!!!!!! Join Date: Aug 2000 Location: Jonesboro,Georgia,USA (Providence, Ri) Posts: 868	Thanks guys. Do i have to remove the smog equip to get the A/C out? Some instructions or pictures would help. I need to know what all has to be done so i don't miss something. Light Em Up!!

01-14-2001, 03:24 AM	#6
Mustanguy Guest Posts: n/a	Goto www.mustangofthemonth.com they have a article about removing the A/C. Click on the link labeled OLD,then scroll down to the tech section. ------------------ Paxton Blown 87GT [This message has been edited by Mustanguy (edited 01-14-2001).]

01-14-2001, 09:50 AM	#7
NoSlow5.0 YOU HAVE NO MARBLES!!!!!! Join Date: Aug 2000 Location: Jonesboro,Georgia,USA (Providence, Ri) Posts: 868	Thanks. That's perfect. Light Em Up!!!