How to clean fuel injectors

289 · 12-13-2003, 09:42 AM

I have my fuel injectors out and I was wondering how should I clean them up.

fiveohpatrol · 12-13-2003, 07:33 PM

soak them in a can of gasoline over night

Scrapla · 12-13-2003, 10:39 PM

Soaking in gasoline works and also spray some carb cleaner in them to clean that fine screen which you can see when looking down into the top of your injector, also I used a spare pig tail and a 9volt battery and what you do is spray some cleaner in there until your injector is full and then hook it to the battery and let it run through and I would get some new o rings while your at it they sell the O ring kit at any auto parts store and its like 3bucks and you'll need two kits, any questions just email me scrapla@hotmail.com

svt522 · 12-14-2003, 09:04 AM

Check out the following thread:

http://forums.mustangworks.com/showt...threadid=40163

12-13-2003, 09:42 AM	#1
289 Registered Member Join Date: Jan 2000 Location: Mount Joy, PA , U.S. Posts: 198	How to clean fuel injectors I have my fuel injectors out and I was wondering how should I clean them up.

12-13-2003, 07:33 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	soak them in a can of gasoline over night __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-13-2003, 10:39 PM	#3
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Soaking in gasoline works and also spray some carb cleaner in them to clean that fine screen which you can see when looking down into the top of your injector, also I used a spare pig tail and a 9volt battery and what you do is spray some cleaner in there until your injector is full and then hook it to the battery and let it run through and I would get some new o rings while your at it they sell the O ring kit at any auto parts store and its like 3bucks and you'll need two kits, any questions just email me scrapla@hotmail.com __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

12-14-2003, 09:04 AM	#4
svt522 Registered Member Join Date: Nov 1999 Location: Hampton, Va Posts: 14	Check out the following thread: http://forums.mustangworks.com/showt...threadid=40163 __________________ 1996 SVT Cobra #522 1973 "Q" code Mach1 1967 F-100, 5.0 Stang engine, ported heads, F-303, Mustang SEFI, 1988 Truck 5-Speed, 9-inch w/ 4.11 Detroit Locker

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Pump Problems	blue302	Windsor Power	3	07-08-2005 10:18 PM
fuel pump with 24# injectors	avbcon12	Windsor Power	8	02-13-2002 01:32 PM
Noisy Fuel Injectors?	LfiveohX	Windsor Power	9	10-04-2001 12:16 PM
Fuel Injectors from a 95 stang	NOS_Contour	Windsor Power	0	08-03-2001 09:31 AM
Car almost left me stranded! Fuel pump/Starting/Idle problems	MTU 50	Windsor Power	10	06-16-2001 12:43 PM