![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() I was looking at my fan and I see that there are cracks on my fan. Not on the blades, but on the circular housing for the clutch. I'm assuming that this isn't normal or a good thing. A new fan from ford is over $120.00 without the clutch, and the local junkyard doesn't have one. I found a 7 blade fan, but the one I have now is 9 blades. I'm afraid that my fan is going to explode and rip up my radiator. Do I stick the 7 blade on her and keep hunting? With the heating problem I'm currently having, I'm afraid to run her with this for too long, especially in the summer.
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() I live in south tx too, now dude, i have a flex-a-lite electric fan i paid 240$ for but it was worth it, i had a police cluthc fan, my brother noticed it sitting slightly sideways, well i didnt think much of it, couple days later, i heard a loud snap! and luckily i was a mile from my house, i looked and sure enough the whole fan broke off where you explained is cracked, and it cost me a radiator, and tore up my shroud, thank god for the shroud or else i would be getting a cowl hood also, the blackmagic fan has its own shroud, and is durable, so i recomend the flexalite bm fan for the 5.0.
btw, where in south tx you live?
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#3 |
Moderator
Join Date: Mar 2001
Location: Myrtle Beach SC
Posts: 1,643
|
![]() Your right dude, its not normal or a good thing. I worked at the Ford dealership for a while and we replaced several of these. NOt really sure what causes it, but you need to get it replaced before it becomes shratnel... trust me, its not pretty. I recommend goin with the electric fans since you'll be replacing. I mean replacing with o.e.m. just isnt any fun anyways so why not upgrade.
Brad
__________________
1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator |
![]() |
![]() |
![]() |
#4 | |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() I replaced my stock clutch fan with a Ford 'Special Service police-duty' model. Better cooling and less drag for a good price. Probably lasts longer, too. $100. + S&H from Mustangs Unlimited.
Just another option to consider. |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() Brownstown! Yeah, its hot there. I just got back from South Fadre, and about to go back. Heh, I wish I could live down there.
Yeah the electric fan was an upgrade for me, some people hear say it overheats. I wouldn't know why, unless they have 600 hp or something. I dont want to down the police clutch fan, which is what I had, because mine probably had many miles on it, so they might be good when replaced new. I just know I'm never going with another one of those again, just a loss of power imo, but I do alot of racing.
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#7 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() Coupe5oh:
FYI: The stock clutch fan (or the police-duty model) only operates at idle or low speeds so it doesn't really cost any power, especially when racing. Electric fans are the best for maximum, controlled cooling but they have a short lifespan in most applications. Flex fans are worse than the stock clutch fan, in my opinion. The clutch fan works well but it's a replacment item, like a battery or a clutch and not meant to last forever. I'm on my third clutch fan in 12 years so I consider five years as the average life of a clutch fan. $20. per year. Not bad. |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() Yes, i know they have no drag on a motor at high speeds, thats why i said, mine was probaly failing, obviously since it broke off it wasnt working properly, all i know is, i felt every bit of 10-15 hp when it did break, so it wasnt engaging correctly, and my electric fan was over 200$ so it better last a long time, 2 years later, no problems yet, i just hear you dont want to get them too wet, which is common sense, also, my fan rarely comes on unless im idling with the a/c on, on the higway it usually stays off, since the air passing through cools enough. newr car come stock with these, so i figure they finally got smart.
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#9 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() $100 + s/h for police duty
$200 + s/h for black magic decisions decisions. Best bang for buck seems to be police fan, but w/my heating probs, maybe I should go w/ bm...What's the right call guys??? 100 degree + summers days are common down here. |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() Well you know what i recomend, and my fan is wired into the a/c relay, so when the a/c is on the fan will be on, i know how hot it gets in south tx, so i recomend a 180 stat, 3 core radiator, and the BM fan, they make one especially for the 5.0, i know of guys running flex fans also, but they probaly drag a little more than a clutch setup, good luck on your decision.
In traffic with my a/c on, with underdrive pullies, my guage barely goes past the 2nd mark, stays under half way, the fan will draw more off you charging system, so if you have a stereo system, and pullies, you might think about upgrading your alternator, i have a stock autozone one, and it undercharges, but not enough to cause problems, yet ![]()
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer ![]() Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
![]() |
![]() |
![]() |
#11 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() I'm really leaning towards the bm...My pulleys are only crank and water pump w/bracket for alternator. I got the 3 core already w/ a 180 stat.
|
![]() |
![]() |
![]() |
#12 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() I have a Ford Racing 3-row radiator, Ford Racing police-duty clutch fan, stock 192 degree thermostat, stock WP, a 40/60 coolant/water mix and Water Wetter.
Never a problem with cooling on even the hottest days (high 90's around here). If you're worried about it, get the BM electric fan. It will cool better - to a point - but they do burn out eventually and can have problems, but not enough to advise against it. Good luck. Stay cool. ![]() |
![]() |
![]() |
![]() |
#13 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() I think one of the biggest factors against the police clutch is that I would have to get the clutch @ $100 + the fan also @ $120 from the dealer, initially coming out to $220. I appreciate your advice. All the input from you guys helps me make a decision where I don't feel like I'm guessing.
|
![]() |
![]() |
![]() |
#14 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() Yea thats all i have is the crank pulley, and water pump,
I never tried watter wetter, i might later on, also, mr50, high 90's is nothing to cool, but where he lives bronws, it can get 110, even here in SA, we see 105 sometimes, I worked in brownsville a couple years ago, very humid too. ![]() |
![]() |
![]() |
![]() |
#15 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
![]() Sometimes the heat is almost unbearable. I ordered the BM last night. Mr 5.0, Coupe 5.0, PonyPower 90, I really appreciate your advice. I think I just need that extra cooling. All of your advice is coming in very handy. I love the sound of my car, I can really feel the response, and I'm getting better gas mileage. Thanks guys. I'm open to all your advice and tips...
|
![]() |
![]() |
![]() |
#16 |
Registered Member
Join Date: Sep 2001
Location: zachary, la
Posts: 73
|
![]() another thing you might want to consider down the road also with the black magic fan is a 130 amp altenator. i had the black magic with the fms pulley street set and i really had to watch the amp needle at night. i used all 3 pulleys. but after i added the 130 amp altenator i don't have to worry about it anymore. just put on the black magic and see what happens. i think you will enjoy, i know i enjoy mine after 3 years
__________________
GT-40X(58cc)heads, cobra upper&lower, FMS 65mm TB, 75mm Bullet, 24# injectors, 190 lph fuel pump, moroso cold air intake, BBK 1 5/8 equal length headers, flowmaster cat back, 1.7 cobra rockers, crane 2031, T5Z gear box, centerforce dual friction, mcleod bullet proof bellhousing, 3.55 gears, hurst billet shifter with over 193,000 miles. thanks to all who contributed |
![]() |
![]() |
![]() |
#17 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
![]() Yea i mentioned that earlier, but i use a 60amp autozone alt, and im doing alright, alhtough i can see my lights dimm at night when i stop, but it hasnt been a problem yet.
|
![]() |
![]() |
![]() |
#18 |
Registered Member
Join Date: Apr 2001
Location: Metairie, La. USA
Posts: 132
|
![]() Make sure that you dont need alot of air flow through your radiator. I bought a BM and it does not cool my car very well. I already have a 3 row rad, hi-flow water pump running straight water and water wetter. It would not keep the car cool at all. In traffic I overheated to at 250 on at least 2 occasions.
__________________
Engine: 1990 5.8 / Edelbrock Performer set-up MSD ignition Suspension: Maximum Motorsports Caster-Camber Plates / Maximum Motorsports adjustable lower control arms / FRPP heavy duty upper control arms / Tokico Illumina Shocks and Struts / Ground Pounder Coil Over conversion kit front / Steeda cross brace sub-frame connectors / Drivetrain: Tremec 3550 trans / Steeda Tri-Ax shifter / Spec Stage II clutch and pressure plate / Spec aluminum flywheel / 5.8 in the hole |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
this cracks me up!! | redthunder | Blue Oval Lounge | 5 | 02-12-2003 05:52 PM |
this cracks me up! | WADS56 | Blue Oval Lounge | 2 | 02-12-2003 07:44 AM |
this cracks me up! | redthunder | Blue Oval Lounge | 0 | 02-11-2003 01:51 PM |
is your computer safe? | srv1 | Blue Oval Lounge | 7 | 11-28-2002 08:42 PM |