Need info for brake conversion

Mustang Fanatic · 04-02-2006, 04:55 PM

I own a 92 Mustang and I also have a wrecked 86 Mark VII LSC that I want to pull the brake system off of to put on the Mustang. I had planned on just swapping the whole rear end out of the LSC into the Mustang. I have read somewhere before that the axle tubes are 1.25 inches longer than the ones in the Mustang, is that true? Also, will the spindles from the LSC bolt directly to the a-arms on the Mustang? I don't want the anti-lock brakes so can I use the stock booster or what booster would I have to use to keep from using the ABS booster on the LSC?

lucheski · 04-05-2006, 10:27 AM

http://sn95brakes.cjb.net

04-02-2006, 04:55 PM	#1
Mustang Fanatic Registered Member Join Date: Apr 2006 Posts: 2	Need info for brake conversion I own a 92 Mustang and I also have a wrecked 86 Mark VII LSC that I want to pull the brake system off of to put on the Mustang. I had planned on just swapping the whole rear end out of the LSC into the Mustang. I have read somewhere before that the axle tubes are 1.25 inches longer than the ones in the Mustang, is that true? Also, will the spindles from the LSC bolt directly to the a-arms on the Mustang? I don't want the anti-lock brakes so can I use the stock booster or what booster would I have to use to keep from using the ABS booster on the LSC?

04-05-2006, 10:27 AM	#2
lucheski Registered Member Join Date: May 2004 Location: Tennessee Posts: 21	Re: Need info for brake conversion http://sn95brakes.cjb.net __________________ 306,Hyper Pistons,Edelbrock Performer RPM "Typhoon" Intake (Ported), 1969 351W Heads (ported) 60cc combustion chambers machined to 50cc, 10:1 Compression Ratio, F-303 Cam, Harland Sharp 1.6 Ratio Roller Rockers, A9L ECU, 70MM Cobra MAF, 24lb/hr Injectors, MAC Equal Length Headers, MAC Offroad H-Pipe with Flowmaster Mufflers, 3.55 Posi Rearend...dreaming of 12s, need to run it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5 lug conversion	stanger9219	Windsor Power	2	02-25-2004 11:31 PM
What all do you need to do rear disc conversion w/ SN95 Parts	KG88GT	Windsor Power	1	07-29-2003 01:45 PM
questions about maf conversion	spankaveli	Windsor Power	10	10-19-2002 02:46 PM
mass air 87GT conversion	greydan	Windsor Power	3	01-02-2002 07:57 PM
Disc Brake Conversion	RMARIANI	Windsor Power	0	03-30-2001 08:12 AM