93 cobra vibration issue with new tremec3550 and centerforce clutch

93TEALSVT · 05-23-2010, 07:27 PM

I just installed a new tremec3550 and a new centerforce dual friction clutch. I eliminated the center hangers after reading up on an exhaust vibration issue. The problem I'm having now, right after I started it up, is this horrible vibration when I hit the accelerator. This is both at idle, sitting still, and on the road. That was a lot of work getting that tranny in there. Well, probably because I had the bright idea of installing long-tube headers long before this also but it was a big pain in the behind. Has anyone had any similar issues like this when installing a new trans and clutch. I also installed a new rear main bearing seal during the process. I could really use some input on this problem. Any help at all is greatly appreciated.

goodyear1984 · 05-26-2010, 10:47 PM

if u didnt have the problem befor hand you should take it apart befor u mess something up.my friend had a problem like that and he some how had the wrong pressure plate, it bolted in fine but it was rubbing on the bellhousing

05-23-2010, 07:27 PM	#1
93TEALSVT Registered Member Join Date: May 2010 Location: PA Posts: 3	93 cobra vibration issue with new tremec3550 and centerforce clutch I just installed a new tremec3550 and a new centerforce dual friction clutch. I eliminated the center hangers after reading up on an exhaust vibration issue. The problem I'm having now, right after I started it up, is this horrible vibration when I hit the accelerator. This is both at idle, sitting still, and on the road. That was a lot of work getting that tranny in there. Well, probably because I had the bright idea of installing long-tube headers long before this also but it was a big pain in the behind. Has anyone had any similar issues like this when installing a new trans and clutch. I also installed a new rear main bearing seal during the process. I could really use some input on this problem. Any help at all is greatly appreciated.

05-26-2010, 10:47 PM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: 93 cobra vibration issue with new tremec3550 and centerforce clutch if u didnt have the problem befor hand you should take it apart befor u mess something up.my friend had a problem like that and he some how had the wrong pressure plate, it bolted in fine but it was rubbing on the bellhousing __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Centerforce Dual Friction Clutch?	95mustanggt	Windsor Power	2	07-27-2009 11:38 PM
centerforce clutch problems	Z28EATR	Windsor Power	6	02-18-2004 05:59 PM
Vibration in the clutch arm	CapaC	Windsor Power	3	04-09-2003 10:51 AM
I need a clutch; Zoom or Centerforce	stevstum	Windsor Power	6	05-28-2002 09:50 PM
NE1 have vibration problems with Centerforce clutch	Saleen308	Windsor Power	2	01-17-2001 07:46 PM