Newer Seats in Fox?

90lxracer · 03-31-2003, 10:40 PM

I was thinkin of putting 95+ black leather seats in my 90 lx hatch. Can it be done? Anybody have any pictures? any info would be appreciated.

Adam

DemonGT · 04-01-2003, 08:07 AM

here is a pic of 2001 GT seats in a fox..from what i know there direct bolt ins...you can even splice into the wiring and use the power lumbar

cyberstang5.0 · 04-01-2003, 08:14 AM

I have SN-95 seats in my stang. The fronts are a direct bolt in and the power plugs are identical. The stock seats only had power lumbar and my newer seats are fully automatic. The connectors just plugged right in together

The backs are a different story. They are not the same and will not fit unless you do some custom work.

03-31-2003, 10:40 PM	#1
90lxracer Registered Member Join Date: Oct 2002 Location: houston, Texas Posts: 65	Newer Seats in Fox? I was thinkin of putting 95+ black leather seats in my 90 lx hatch. Can it be done? Anybody have any pictures? any info would be appreciated. Adam __________________ 1990 lx 5.0L 5 spd. BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/ pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys 1997 Chevy Silverado Z71 4x4 6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges

04-01-2003, 08:07 AM	#2
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	here is a pic of 2001 GT seats in a fox..from what i know there direct bolt ins...you can even splice into the wiring and use the power lumbar __________________ '91 GT,410W,10.5 to 1 comp,Victor Jr. heads,Victor 5.8 intake,FTI cam,Crane retro fit lifters,Scorpian 1.6 RR's,Melling HV oil pump,MSD distro.,Canton oil pan,FMS flywheel,Romac balancer,FMS timing chain,Accufab 90mm TB,C&L 76mm maf, 42lbers,HD clutch,K&N air filter,Mac long tubes,Pro dumps,powerchamber,FMS 9mm wires,180 thermostat,Ford Racing gauges,5inch Tach,centerline convo pro's,nitto DR's,Pro3i lower control arms,50/50 shocks,3.55 gears,TFS HD diff. cover Next year: Tremec TKO,Spec stage 3 clutch,alum driveshaft,complete fuel system www.angelfire.com/linux/demondan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Overweight passengers having to purchase 2 seats, fair or not fair	Dark_5.0	Blue Oval Lounge	41	06-21-2002 11:28 AM
Seats	mustangdon2k	Classic Mustangs	3	06-17-2002 11:56 PM
seats seats seats	digital3.3	Blue Oval Lounge	0	06-17-2002 10:02 PM
Swapping in newer buckets	restridge	Classic Mustangs	1	02-24-2002 08:50 PM
Newer Mustang seats in an older model?	89 Cobra LX	Windsor Power	1	11-07-2001 04:55 PM

04-01-2003, 08:14 AM	#3
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	I have SN-95 seats in my stang. The fronts are a direct bolt in and the power plugs are identical. The stock seats only had power lumbar and my newer seats are fully automatic. The connectors just plugged right in together The backs are a different story. They are not the same and will not fit unless you do some custom work.