best HP guess???

MiracleMax · 08-06-2004, 12:01 AM

Okay best guess on HP estimate?

347 cid
AFR 185's (port matched)
Victor 5.0
75mm T-body
1-3/4 long tubes
11:1 comp
Comp Cams Nitrous HP, 232/244 @ .050 - .565/.580 - 114 deg for the cam specs, cam is retarded 2 deg.

Gonna round out the motor with 36 lbs/hr injectors and a 77mm Pro-M unit.

88fivepointoh · 08-08-2004, 05:37 PM

my guess, 375hp...

jonnyk · 08-08-2004, 07:03 PM

375 to the wheels? That'd be close to my guess too.

88fivepointoh · 08-08-2004, 08:30 PM

yea, 350-375 conservitively speaking at the rear wheels.. what cam is in there?

MiracleMax · 08-09-2004, 09:13 PM

Comp Cams Nitrous HP, 232/244 @ .050 - .565/.580 - 114 deg LSA, cam is retarded 2 deg.

Part# 35-560-8, NX282HR

Told the CC rep that I was looking for 400+ HP and a red line past 6000

advertised operating range is 2600 to 6600

also told him no S/C or NO, but interestingly that is the cam he spec'd fro my engine.

88fivepointoh · 08-10-2004, 03:42 PM

350 at the rear... pretty close to that.

fiveOguy20 · 08-10-2004, 09:59 PM

hmm u guys seem to be rating REALLY conservative haha. i think properly tuned his combo is capable of 400+ at the wheels. my 2 cents

88fivepointoh · 08-10-2004, 10:15 PM

better to expect less and get suprised with more, then expect more and get less, I have seen a similar setup dyno at around 350-375 rwhp. those are my thoughts.

MiracleMax · 08-10-2004, 10:45 PM

was that with a stock computer 88 or something better able to support the engine?

Dark_5.0 · 08-11-2004, 01:18 PM

I just helped a buddy put together a 393 stroker 10 to 1 with ported victor junior heads and a trick flow R intake with a 600 lift cam single pattern with 224 duration, also has 36 # injectors and the car runs and idles like a dream with the A9L ecu.

88fivepointoh · 08-11-2004, 02:44 PM

By buddy ran a A9L, not speed density...

08-08-2004, 07:03 PM	#3
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	375 to the wheels? That'd be close to my guess too. __________________ Novi 2000 now spinning off the snout of the 331... Mods Pics

08-09-2004, 09:13 PM	#5
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	Comp Cams Nitrous HP, 232/244 @ .050 - .565/.580 - 114 deg LSA, cam is retarded 2 deg. Part# 35-560-8, NX282HR Told the CC rep that I was looking for 400+ HP and a red line past 6000 advertised operating range is 2600 to 6600 also told him no S/C or NO, but interestingly that is the cam he spec'd fro my engine. __________________ 2002 5M GT (99% stock) 1991 5M LX (30% stock) patiently awaiting my satin silver 07 Mach 1, and don't forget the shaker

08-10-2004, 09:59 PM	#7
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	hmm u guys seem to be rating REALLY conservative haha. i think properly tuned his combo is capable of 400+ at the wheels. my 2 cents __________________ 347- ported X heads, Xcam , RPM air-gap intake, 650 holley DP, 10:5 comp., equal lenght shorties, pullies, MSD ignition, pro 5.0 shifter. stock fuel system !! best ET: 11.95 @113 1.64 60 foots

08-10-2004, 10:45 PM	#9
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	was that with a stock computer 88 or something better able to support the engine? __________________ 2002 5M GT (99% stock) 1991 5M LX (30% stock) patiently awaiting my satin silver 07 Mach 1, and don't forget the shaker

08-11-2004, 01:18 PM	#10
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I just helped a buddy put together a 393 stroker 10 to 1 with ported victor junior heads and a trick flow R intake with a 600 lift cam single pattern with 224 duration, also has 36 # injectors and the car runs and idles like a dream with the A9L ecu. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

08-08-2004, 05:37 PM	#2
88fivepointoh Registered Member Join Date: Aug 2002 Location: Rochester Posts: 553	my guess, 375hp...

08-08-2004, 08:30 PM	#4
88fivepointoh Registered Member Join Date: Aug 2002 Location: Rochester Posts: 553	yea, 350-375 conservitively speaking at the rear wheels.. what cam is in there?

08-10-2004, 03:42 PM	#6
88fivepointoh Registered Member Join Date: Aug 2002 Location: Rochester Posts: 553	350 at the rear... pretty close to that.

08-10-2004, 10:15 PM	#8
88fivepointoh Registered Member Join Date: Aug 2002 Location: Rochester Posts: 553	better to expect less and get suprised with more, then expect more and get less, I have seen a similar setup dyno at around 350-375 rwhp. those are my thoughts.

08-11-2004, 02:44 PM	#11
88fivepointoh Registered Member Join Date: Aug 2002 Location: Rochester Posts: 553	By buddy ran a A9L, not speed density...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hummm.....guess Civic's can't turn either	tireburner163	Stang Stories	1	06-11-2003 11:16 PM
Guess what happened at.....	mike_navigator	Blue Oval Lounge	13	12-16-2001 12:55 AM
Finally Dyno'd my car! Anyone want to guess?	Stangrrr	Stang Stories	23	10-30-2001 07:26 PM
Who will be in the front (guess guy's) ????!!	HAITHAM	Windsor Power	3	05-06-2001 08:45 AM
What's your best guess???	Kevin Price	Blue Oval Lounge	51	01-30-2001 10:27 PM