Cobra Throttle Body on a LX??????

Stang Runner · 06-24-2001, 02:03 PM

I am porting the intake an saw how small the stock Throttle Body was compared to the EGR spacer. Are the Cobra Throttle Body bigger?? And will they fit on the stock Intake?? Thanks

------------------
1988 LX 5.0 3060lbs (full Tank) 14.90@100.2 On a Gtech
Drivetrain: 2.73 Stock Gears (New Gears Ordered 3.55), World Class T-5, Lakewood Bellhousing, Summit Adjustable Cluch Quadrant & Cable, Alumminum Driveshaft, Flaming River Manual Steering Rack
Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, Ram air, K&N, Under Drive Pulles
Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\bac

[This message has been edited by Stang Runner (edited 06-24-2001).]

93CobraR · 06-24-2001, 05:50 PM

Yeah, the 93 Cobra throttle bodys were 65mm. They will bolt right up.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.759
Best MPH 106.79
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

Stang Runner · 06-24-2001, 06:19 PM

I will try to find one in town at the Junk yards! Thank for the Help

[This message has been edited by Stang Runner (edited 06-24-2001).]

06-24-2001, 02:03 PM	#1
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Cobra Throttle Body on a LX?????? I am porting the intake an saw how small the stock Throttle Body was compared to the EGR spacer. Are the Cobra Throttle Body bigger?? And will they fit on the stock Intake?? Thanks ------------------ 1988 LX 5.0 3060lbs (full Tank) 14.90@100.2 On a Gtech Drivetrain: 2.73 Stock Gears (New Gears Ordered 3.55), World Class T-5, Lakewood Bellhousing, Summit Adjustable Cluch Quadrant & Cable, Alumminum Driveshaft, Flaming River Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks Engine: Steal Mounts, Ram air, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\bac [This message has been edited by Stang Runner (edited 06-24-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
throttle body question	93GTDIN	Windsor Power	2	04-26-2002 01:52 PM
99-01 Gt Throttle Body 70mm Stock?	steedamustang01	Modular Madness	5	04-17-2002 11:54 PM
Will A Throttle Body Do Much For Ya With Minor Mods?	steedamustang01	Modular Madness	15	04-15-2002 10:38 PM
throttle body and egr question	scale	Windsor Power	6	04-02-2002 10:03 PM
Awesome,Fast Paced Night. 7 Mustangs and one 99 Z28 6spd. I Toast a 94 Cobra.	Mercury	Stang Stories	7	10-30-2001 01:08 PM

06-24-2001, 05:50 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Yeah, the 93 Cobra throttle bodys were 65mm. They will bolt right up. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.759 Best MPH 106.79 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

06-24-2001, 06:19 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I will try to find one in town at the Junk yards! Thank for the Help [This message has been edited by Stang Runner (edited 06-24-2001).]