Quads

evilmustang · 09-06-2001, 05:24 AM

Is anyone running their stang without the quad shocks? I replace my quads a while back with KYBs but they rub on my rear shocks. Will removing the quads hurt anything? I have Tokico non-adjustable shocks, eibach springs, and Kenny Brown subs.

1BAD89 · 09-06-2001, 05:47 PM

Yes... don't remove them, it will hurt your traction significantly. Unless you get that Quad removal kit.

------------------
1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now.

2000 Camaro SS-A4, 13.7's bone stock.

1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

TEXSN95 · 09-06-2001, 10:34 PM

Get global west lower control arms and you can junk em.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 105.7 w/ 2.22 <-- 284 rwhp / 323 rwtq

84LX89GT · 09-07-2001, 03:06 PM

The idiot who owned the GT before me removed the quad shocks, and yesterday when i did a burnout for a friend at a previous place of employment my car was hopping around more than a river dancer.... i had to let off because i didn't want to get whiplash from all the jerking my head was getting. I'm going to buy some new quads. I would VERY HIGHLY recommend keeping your quads.

------------------
previous name: 84stangLX
'84 Mustang 5.0 LX
my LX
'89 Mustang GT
my GT

evilmustang · 09-07-2001, 05:18 PM

Cool, I'll keep them on thanks guys.

09-06-2001, 05:24 AM	#1
evilmustang Registered Member Join Date: Jan 2001 Location: compton, CA, USA Posts: 63	Quads Is anyone running their stang without the quad shocks? I replace my quads a while back with KYBs but they rub on my rear shocks. Will removing the quads hurt anything? I have Tokico non-adjustable shocks, eibach springs, and Kenny Brown subs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
struts shocks quads	chatcher	Windsor Power	7	04-15-2002 07:47 PM
88LX rolled fender lips, no quads, will 275/50R15's fit with a 7" wheel?	fiveohpatrol	Windsor Power	10	07-27-2001 01:00 PM
Widest tire on pony rim?	BurninBurt	Windsor Power	10	06-11-2001 06:53 PM
bfg drags, weld draglights, MT slick question??	LX XLR8R	Windsor Power	4	02-27-2001 11:45 PM
Will these tires rub???	Mark 5.0	Windsor Power	8	02-26-2001 12:19 AM

09-06-2001, 05:47 PM	#2
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Yes... don't remove them, it will hurt your traction significantly. Unless you get that Quad removal kit. ------------------ 1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now. 2000 Camaro SS-A4, 13.7's bone stock. 1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

09-06-2001, 10:34 PM	#3
TEXSN95 Registered Member Join Date: Mar 2001 Location: college station, tx Posts: 143	Get global west lower control arms and you can junk em. ------------------ Clint L. White 95 Cobra #3637 58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s 13.61 @ 105.7 w/ 2.22 <-- 284 rwhp / 323 rwtq

09-07-2001, 03:06 PM	#4
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	The idiot who owned the GT before me removed the quad shocks, and yesterday when i did a burnout for a friend at a previous place of employment my car was hopping around more than a river dancer.... i had to let off because i didn't want to get whiplash from all the jerking my head was getting. I'm going to buy some new quads. I would VERY HIGHLY recommend keeping your quads. ------------------ previous name: 84stangLX '84 Mustang 5.0 LX my LX '89 Mustang GT my GT

09-07-2001, 05:18 PM	#5
evilmustang Registered Member Join Date: Jan 2001 Location: compton, CA, USA Posts: 63	Cool, I'll keep them on thanks guys.