horn button

aar0s · 08-04-2004, 09:27 PM

is there anyway to recondition the horn button? i tried once using a sponge but it didnt work too well or maybe someplace that sells new ones at a reasonable price.

82 GT · 08-05-2004, 10:57 PM

Let me guess........sometimes it sticks "on"
That happened to my '88 a little bit ago. I just removed the horn button from the center of the wheel and took the vinyl cover off and put it back on again and it works so far.
If it does it again, 'm going to the junkyard and get another one.

Mustang_289 · 08-06-2004, 06:25 AM

We had the same problem on our 88GT. Go down to your local fabric store and pickup some 1/4" foam strips. Cut them in small pieces and glue them onto the bottom metal plate. This will be good insulation and this fix has lasted a few years already.

08-04-2004, 09:27 PM	#1
aar0s Registered Member Join Date: Nov 1998 Location: southern Illinois Posts: 312	horn button is there anyway to recondition the horn button? i tried once using a sponge but it didnt work too well or maybe someplace that sells new ones at a reasonable price. __________________ 88 gt convertable =-= cobra intake, accufab 65 mm tb headers alum underdrives steeda alum.lca's, springs, c/c plates kyb struts 230 hp to da wheels http://www.cybersteed.freeservers.com

08-05-2004, 10:57 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Let me guess........sometimes it sticks "on" That happened to my '88 a little bit ago. I just removed the horn button from the center of the wheel and took the vinyl cover off and put it back on again and it works so far. If it does it again, 'm going to the junkyard and get another one. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any gains from removing holley choke horn?	crazypete	Windsor Power	11	10-16-2004 07:38 AM
horn not working in 87 LX	taco	Windsor Power	11	08-01-2004 11:59 AM
The horn	nicolette	Classic Mustangs	4	10-14-2001 10:23 PM
Follow up to horn........	98'MustangGT	Modular Madness	6	07-20-2000 10:02 PM

08-06-2004, 06:25 AM	#3
Mustang_289 Registered Member Join Date: Sep 2001 Posts: 512	We had the same problem on our 88GT. Go down to your local fabric store and pickup some 1/4" foam strips. Cut them in small pieces and glue them onto the bottom metal plate. This will be good insulation and this fix has lasted a few years already.