C&L Users or MAF Experts

[Tony91LX]

Just a couple of stupid MAF questions,

1) Where do you buy stock MAF electronics when they go bad, all that I can find is the entire meter.

From Ford: $169 + $90 Core
Auto Zone $79.99 + $60 Core (some brand I never heard of)
Auto Palace $100 + $?
(brand X)

Should I just go with the ford part? Is it that much better?

2) When installing the electronics in to the C&L do you need to use dielectric grease?


Thanks,

[Rick 91GT]

Well I really don't know what to say, but I would think the Ford parts are the best. However the Auto Zone parts are most likey Ford parts that have been refurbished.

I just took the old electronics off and installed them in the new meter, I did use a small dab of dielectric grease in the connector, never hurts.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree

[2FastLX]

Is there something wrong with your electronics that is causing you to have to buy a new one?

You might try www.mass-air.com
They have all kinds of electronics gadgets.

------------------
Gunning for 12's!

Buy your parts here
ICQ# 42269241

[Tony91LX]

I looked at the Auto Zone meter no name brand I didn't feel to confident buying it, I am going to get the Ford part.

I have gotten several codes, and after doing some searching I believe that the MAF sensor is bad.

Thanks

[Tony91LX]

I tried www.mass-air.com and they have just the electronics, they are new ford parts for only $119. I ordered it

So, I will let you know how it works.

Thanks