![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Oct 2000
Location: wichita, ks, usa
Posts: 10
|
![]() 95 GT 5.0 w/powerdyne (11 psi), 255LPH fuel pump, 3" pipes, all else stock. what else do i need to upgrade to take full advantage of the supercharger? i'm considering larger injectors (but how big?) also, do i need to upgrade the computer chip in any way? or anything else i haven't mentioned? please advise what you think. thanks.
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]() Get yourself a MSD ignition box with rev control.(the factory rev limiter shuts off fuel to the injectors at a given rpm,which is not good in a blown application)
Know your fuel pressure,install a fuel pressure gauge. Get at least 30# injectors,these will support what you have just fine. Upgrade your mass-air meter,as the factory meter is very restrictive.This allows supercharger to work more effeciently.Also upgrade your exhaust system as your shoving in alot more air,so you want it to be able to exit easy as well. ------------------ Mustang..it's not just a car,it's an attitude |
![]() |
![]() |
#3 |
Registered Member
Join Date: Feb 2000
Location: Flemington, NJ USA
Posts: 166
|
![]() I agree with mustanguy. The MSD 6BTM is a good piece that has served me well for years. Multisparks with the timing retard with respect to boost pressure feature makes it worth the $300 or so it costs. The MSD will cut spark to alternating cylinders at the rev limit you set, which will keep you from going lean and make your motor last longer./
|
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Sep 2000
Location: Concord, MA, USA
Posts: 264
|
![]() To take full advantage of the blower you need some heads and intake. Stock heads and intake a very restrictive for a blower with 11# of boost.
------------------ 1995 GT Black sleeper Edelbrock aluminum heads,Edelbrock aluminum intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter Flowmaster cat-back, Eibach pro rate springs lower control arms 3.73 rear gear New: Centerforce clutch,plan to remove a/c |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Sep 2000
Location: Lafayette, Indiana
Posts: 120
|
![]() When your Powerdyne breaks, go get yourself a real blower.
|
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Oct 2000
Location: wichita, ks, usa
Posts: 10
|
![]() thanks for the info. can anyone tell me how big a job it is to install the MSD6BTM type ignition setup? also the mass air upgrade? do these changes cause a need to change or update the eec-iv computer system, or are the compatible? please be patient, this is my first efi car and first supercharger i've ever had. thanks.
|
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
![]() Adding any aftermarket heads and an intake along with a 70 mm throttle body and a larger mass air meter will likely net you 100 horsepower over the blower, not to mention taking a lot of strain off that intake charge.
(Imagine you trying to breath through a straw while running around the block....) ------------------ 1988 Mustang GT 12.0 @ 121 on radials S-trim Vortech sitting in a box! |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
eibach advice needed | mustardjohn | Small Ponies | 6 | 08-19-2012 08:12 PM |
need advice a supercharger | Mustangboy89 | Windsor Power | 10 | 11-20-2002 08:52 AM |
Advice needed for a futur Mustang owner | Steph | Blue Oval Lounge | 8 | 10-21-2001 11:21 PM |
Veterans Help Needed!!! What do I do Next??? Really in need of Advice!!! | Piston | Windsor Power | 4 | 03-06-2001 10:56 AM |
advice needed on buying a 5.0 | Will G | Windsor Power | 12 | 02-08-2001 04:18 PM |